Performance Parts

Dual Taper 8.700" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.750" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.800" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.050" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.100" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.200" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.300" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.600" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.650" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.650" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.750" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dust Cap- 2;000-3;500-lb. Axles

• Axle Dust Cap

Dust Cap Kit for PerTronix Industrial Electronic Distributor

PerTronix is the leading producer of electronic distributors for gas, propane and LP powered industrial engines.

Dust Cover

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1741 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

EAS Wideband Input

• EAS Accessory
• Plug and Play installation
• Compatible with Trinity and Insight devices

Easy Form Hardline Tubing Kit

• Tube Nuts Included: (10) 3/8"-24, (2) 7/16"-24, (2) 9/16"-18, (2) 1/2"-20

Easy Loom Split Wire Sleeve 0.3125" x 100' 010651B100

• Add A Clean And Classy Look
• Tested to 302°F/150°C
• Self-extinguishing

Easy Loom Split Wire Sleeve 0.5" x 100' 010653B100

• Add A Clean And Classy Look
• Tested to 302°F/150°C
• Self-extinguishing

Easy Mount Kit for Hi-Tek SuperCoolers

• For Mounting B&M SuperCoolers
• Quick and Easy to Install
• B&M Quality Parts

Econ-O-Fit Hose Clamp Size 7 I.D. 21/32 in. Blue - Clamshell Package

Econ-O-Fit is the original anodized aluminum hose clamp cover.

EFI Adapter

• 6061-T6 Aluminum
• Positive Seal At Maximum Operating Pressures

EFI Fuel Pressure Regulator -10 AN (180 GPH) in Blue/Clear Finish

Edelbrock fuel pressure regulators #174022 are machined from aircraft quality aluminum for those who demand the best.

Elbow 45 2.5in O.D. T-304 Stainless Steel

• Universal 45 degree elbow
• Mandrel bent
• Use 18004 3" wide band clamps

Elbow 90 2.5in O.D. T-304 Stainless Steel

• Universal 90 degree elbow
• Mandrel bent
• Use 18004 3" wide band clamps

Elbow 90 3in O.D. T-304 Stainless Steel

• Universal 90 degree elbow
• Mandrel bent
• Use 18006 3" wide band clamps