Performance Parts

10 Tool Steel Retainer Set of 16 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 for All Valves w/ 1.095" O.D. Springs

These new lightweight 1.095" Spring Diameter Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer Set of 16 for All Valves w/ 26056 Springs

These new lightweight 1.185 spring diameter Pack of 16Tool Steel Retainers from COMP Cams have a 10& deg

11" x 11" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

12-1/4in. Standard Threaded Grease Brake Hub Assembly with Installed Bearing Kit

• 16000lbs Axle Capacity
• 8 On 275mm Bolt Pattern
• 17-1/2 in. Wheel Size

12 AN Cap

• Black Anodized

12 AN Port Plug O-Ring

These parts are included with your purchase of an RHS Race Block but are also available for purchase separately.

12in. Hybrid Threaded Grease Brake Hub Assembly with Installed Bearing Kit

• 8000lbs Axle Rating
• 12 in. Brake Hub Size
• 5/8 in. Stud Size

1/2in. x 25ft. Convoluted Slit Loom Tubing (Packaged)

• Protects Loose Wires Against Vibration And Damage
• Slit Lengthwise For Easy Application To Wires
• Stronger And Easier To Use Than A Braided Sleeve

12 Male to -6 Male Union Reducer

• Available for Any Plumbing Situation And Many Custom Applications.

1/2" NPT Internal Plug

• Available for Any Plumbing Situation And Many Custom Applications.

135 Degree Deg Boot Black Sillicone

• Color: Black
• All boot/terminals fit 8-10.4mm
• Pack of 25

14-Amp Turn Signal Flasher (1-4 Lamps; 2-8 Hazards)

• Operates 1-4 Lamps Or 2-8 Hazards
• For Applications Where Over-Current Protection Is Required
• Turn Signal Flashers Are 12-Volt 2-Terminal Flashers

15 PSIa/1 Bar Stainless Sensor Kit

• Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
• Connector and pins included
• Analog Data Scaled in Charts

15' Urathane Hose

• Limited Warranty 2 Year
• Made In USA
• Urethane Hose 15 ft.

15" x 15" HydraMat®, Square

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

15" x 3" HydraMat®, Rectangle

• Works with Alcohol, Ethanol, Methanol, and E-85 fuels
• Works with 2-cycle oil blends as high as 20:1
• Not for use with diesel fuels

16ORB to 3/4 in Hose Barb Aluminum Fitting, Black

• Allows for precise routing of fluid cooler lines
• Adapts -16ORB thread to 3/4-in push-on hose barb
• CNC-machined 6061 aluminum

16 Pulse VW Signal Generator

• Speedometer cable drives on the passenger side front wheel hub

1.78in. Bearing Protector Dust Covers (2-Pack)

• Prevents Dust And Debris From Entering The Bearing Protector
• Bearing Protector Maintains Pressure And Keeps Bearing Greased

180 Degree Boot/Terminal Kit Gray

• Color: Gray
• All boot/terminals fit 8-10.4mm
• Pack of 8

18" FLO Tank w/ Viair 444c black Compressor, 1/4" & 3/8" fittings and tank mounting hardware

• 18 Inch FLO Aluminum Tank
• Viair 444c Black Compressor
• 1/4 In And 3/8 In Tank Fittings And Tank Mounting Hardware

18 in FLO Tank Raw end caps with brushed tube Includes two mounting brackets

• Designed For A Clean And Impressive Air Management Setup

1/8" NPT Hex Head Plug

• Black Anodized

1 Black Viton Valve Seal for .494" Guide Size, 11/32" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.