Performance Parts

Dual Taper 7.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.900" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.950" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.000" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.450" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.500" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.800" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Valve Spring with Damper, 1.560 OD, 1.950 IH, .760 Lift, 500 LBS/IN, SR - Set

COMP Cams' new 26953 dual valve springs are a product of innovative design and superior craftsmanship, with a lineage back to NASCAR competition.

DynoSim 6

EAS Pressure Sensor - 0-100 psi

• 0-100 psi capable
• Easy setup through EAS
• Compatible with CTS2/CTS3

Easy Form Hardline Tubing

• Can be Polished to Shiny Copper Finish

Easy Loom Master Kit 010663

• Approved By Most Car Manufacturers
• Tested to 302°F/150°C
• Self-extinguishing

EFI Fuel Pressure Regulator -10 AN (180 GPH) in Red/Clear Finish

Edelbrock fuel pressure regulators #174021 are machined from aircraft quality aluminum for those who demand the best.

EFI Fuel Pressure Regulator -6 AN (180 GPH) in Black Finish

Edelbrock fuel pressure regulators #174043 are machined from aircraft quality aluminum for those who demand the best.

Elbow 45 3in O.D. T-304 Stainless Steel

• Universal 45 degree elbow
• Mandrel bent
• Use 18006 3" wide band clamps

Electric Cut-Out Replacement Single Wiring Harness

Doug's Headers DEC6231 Electric Cut-Out Replacement Single Wiring Harness

Electric Fan Harness & Relay Kit with 185 Degree Temperature Switch

• 30 AMP Relay
• 30 Amp Circuit Breaker
• Crimp Terminals & Hardware

ELECTRONIC VOLTAGE REGULATOR-CHROME

ACCEL Motorcycle electronic voltage regulators do not require any re-wiring or special mounting.

Eliminator 4-Bank Chip Burner

• DTC Reading And Clearing Capabilities
• Allows For Specific And Accurate Tuning

Emulsion Bleed Kit

• Blank
• 0.020"
• 0.031"

Endure-X Solid Roller Lifter w/ .842" Diameter, Left Pushrod Seat

Solid Roller lifter with cutaway body with oil band and .180" left offset Pushrod seats, single lifter

Endure-X Solid Roller Lifter w/ .842" Diameter, Left Pushrod Seat, .300" Taller

.300" Tall Roller lifter, cutaway body with oil band, .180" left offset, single lifter

Endure-X Solid Roller Lifter w/ .842" Diameter, Right Pushrod Seat

Solid Roller lifter with cutaway body with oil band and .180" right offset Pushrod seats, single lifter