Performance Parts

Heavy-Duty Shock Mount Kit; Fits 2-3/8in. Axle Tube

• Heavy-duty Shock Mount Kit
• Available Sizes 2.375 Or 3 in.
• Single Replacement Shocks Are Also Available

HEI Coil Wire, Blaster 3, Super Conductor, Red

• Coil Wire, Super Conductor

High Energy 206/206 Hydraulic Flat Cam for International Harvester 304-392

High Energy 206/206 Hydraulic Flat Cam for International Harvester 304-392.

High Energy 206/206 Hydraulic Flat Cam K-Kit for International Harvester 304-392

K-KIT - Complete Kit Includes: Camshaft, Lifters, Valve Springs, Retainers, Valve Locks, Valve Stem Seals, Timing Chain Set, Assembly Lube (in flat tappet applications), Decals and Instructions.

High Energy 8.152" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High-output cannister-style ignition coil for Pro-Flo 4 and aftermarket EFI

• Oil-filled cannister design protects coil windings from vibration
• Primary resistance of 0.7 ohms for use with Pro-Flo 4 EFI
• Can be used with other aftermarket EFI

High Output Inductive Coil

• Massive Spark Energy, up to 118 mJ
• Up to 41kV Output Voltage, without a CDI
• Can be installed directly to engine

High Output Smart Coil

• Massive Spark Energy, up to 103 mJ
• Can be mounted almost anywhere
• Weather and Shockproof design

High Vacuum Seal Kit for Belt Drive System

High Vacuum Seal Kit for 6200/6300 Belt Drive System

High Volume Fuel Rail Port Plug

• Sold each
• Fits AEM high flow fuel rails
• black anodized finish

Hi-Tech 11.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.000" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the RPM at which the engine will be run.

Hi-Tech 8.000" Long, .105" Wall, 5/16" Diameter Pushrod Set of 12

Designed to be 17% stiffer than 0.080" wall pushrods, COMP Hi-Tech .105" pushrods feature the same diameter oil holes as standard to retain full flow.

Hi-Tech 9.450" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech One-Piece 8.050" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 8.600" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 9.750" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 9.750" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech Polylock for 7/16" Stud Ultra Pro Magnum Rockers

7/16 HI-Tech Poly Lock

Hi-Tech Polylock Set for 7/16" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Hi-Tech Rocker Stud Set w/ 7/16" Base Thread and 1/2" Rocker Thread

Hi-Tech Rocker Stud Set with 7/16" Base Thread and 1/2" Rocker Thread

Hold-Down Tab Kits (Universal 1.5" long in Black Finish (Qty 8)

The Edelbrock #44273 valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers, our Elite Series and Elite II valve covers, our Classic Series valve covers and our Victor Series valve covers.

Hose Clamp

• Attach To Supporting Structure

Hose & Tubing Separator

• For Professional Engine Look

Hose/Wire Wrap

• Easy Installation And Removal
• Lightweight
• Self-Wrapping

Hot Rod 2-1/8" Gear Select W/OD

• Hot Rod
• With Overdrive
• Curved Glass Lens