Performance Parts

Endure-X Solid Roller Lifter w/ .904" Diameter, Right Pushrod Seat, .300" Taller

.300" Tall Roller lifter, .210" right offset Pushrod seat, cutaway body with oil band, single lifter

Engine Valve Spring Kit

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

ER-1 Disc Brake Pad

Decades of experience, continuous research and development, and dedication to bringing the highest quality premium friction products have led to Talon(R) Rotors.

ER-1 Disc Brake Pad

Decades of experience, continuous research and development, and dedication to bringing the highest quality premium friction products have led to Talon(R) Rotors.

Exhaust Tip

• Clamp On
• Double Wall
• Polished Round Tip

Exhaust Valve for #60599 Cylinder Heads

The Edelbrock #9752 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Exhaust Valve for #60669 & 60689 Cylinder Heads

The Edelbrock #93663 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Exhaust Valve for #60779 & #60179 Cylinder Heads

The Edelbrock #9367 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

EXO Series Protect-A-Boot Ringless 2-Pack 010088

• Improves Heat Dissipation
• No Sewn-In Ring
• 3 In. ID X 6 In. L

Extreme+ Brake System Front

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Extreme+ Brake System Front

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

FACEPLATE FOR #2208; OPTIONAL; SILVER CARBON LOOK

• Silver Carbon Fiber Look Faceplate For PN[2208] Dash Panel
• Translucent Turn Signal/High Beam Indicator Provisions

FITTING; ADAPTER; 12MM BANJO BOLT TO 1/8in. NPTF FEMALE; FUEL PRESSURE

• For Bolt-On Import Under Hood Fuel Filter Application

Flexplate Bolts - 7/16-20 x 13/16 Inch

Mr.

Forward Self-Adjusting Trailer Brake Assembly; 10in. x 2-1/4in.; 4 Bolt; Right S

• Four-Bolt Bolt Pattern
• 4400lbs Axle Capacity
• Self-Adjust Adjustment

Forward Self-Adjusting Trailer Brake Assembly; 12-1/4in. x 5in.; 7 Bolt; Right S

• Driver Vehicle Side/Right
• Seven-Bolt Bolt Pattern
• Self-Adjust Adjustment

Front Drive Distributor Belt

9 mm replacement belt that fits MSD front drive distributors.

Fuel Filter

• Bi-Directional Filters
• Flows Up To 130 GPH
• Rated At 70-75 PSI

Fuel Filter Replacement Element

• Includes O-rings

Fuel Filter Replacement Element

• Includes O-rings

Fuel Hose Kit with Street Fuel Filter

Edelbrock part #8102 ProClassic Fuel Hose with Street Fuel Filter offers a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT to the 5/8" -20 fuel inlet on Edelbrock Performer and Thunder Series AVS Carbs.

Fuel Injection Fuel Feed and Return Pipe Assembly #3604, 67 GPH/255 LPH

Edelbrock Adjustable Return-Style EFI Fuel Kit #3604 includes everything needed to upgrade a carbureted fuel system to a high pressure EFI system, excluding the fuel tank.

Fuel Injector #3522 80 Lb/Hr, Short Body (Qty 8)

Edelbrock part #3522 is a set of (8), short body Siemens Deka High Impedance (12.5 ohms) fuel injector with a flow rate of 80 lb/hr (830cc) @ 43.5psi.