Performance Parts

Conical Valve Cover Breather with 9mm Inlet in Black Element

Edelbrock part #43510 Pro-Flo Valve Cover Breather with 9mm Inlet is a small universal open element conical filter.

DTC-60 Disc Brake Pad

• DTC-60 Compound
• High Temp
• High Torque

DTC-70 Disc Brake Pad

• DTC-70 Compound
• High Temp
• High Torque

Ethanol Content Flex Fuel Sensor Kit (3/8" Barb)

• Accurate with 3% margin for error.
• Weather resistant connector and pins included
• Analog Data Scaled in Charts

Fire-Retardant Shifter Boot w/ Mounting Base Plate

• Cover is Constructed of Two Layers of Banox FR3 Material
• 7.5"x 5.5" Aluminum Frame is Pre-Drilled for Easy Mounting
• Provides Fire Barrier Between Trans Tunnel and Shifter

GAUGE BRACKET KIT; 2 1/16in.; BLACK COMPOSITE; QTY 3

• Includes 3 Aluminum Mounting Brackets
• Includes 6 Lockwashers
• Includes 6 Aluminum Thumb Nuts

GAUGE; FUEL LEVEL; 2 1/16in.; 0OE TO 90OF; ELEC; PHANTOM

• 12 And 16V Compatible
• Works w/Most 1965-1997 GM Senders
• Incl. Mounting Hardware/Instructions

Low Resistance Bushing for HEI Distributor

The carbon rotor button in a stock HEI distributor cap has very high resistance.

PowerFlex Stainless PTFE Hose

• For use with Fuel, Water, and Oils
• For use with Russell PowerFlex Hose Ends
• Stainless Steel Covering

Reducer

• Bolt/Slip-On Reducer
• Kit contains "one pair".
• 3-Bolt Flange

Set of 16 Metal Viton Valve Seals for .530" Guide Size, 3/8 Valve Stem

3/8 x .530" Metal Body Viton Valve Seal

Set of 16 PTFE Valve Seals for .530" Guide Size, 3/8" Valve Stem

Fits: 3/8" Valve Stems - .530" Guides (.630" Seal Diameter).

Trigger Pickup, Universal WO Plate or Rotor, Includes Magnet

This electronic trigger pickup is designed to handle the high temperatures and vibration in motorcycle engines.

Vent Air Filter/ Breather

• 1/2 inch clamp-on flange
• Clamps onto metal or plastic tubing
• Washable and reusable filter media

X-Series AEMnet Can Bus Gauge Kit

• User selectable units of measurement (US or Metric)
• User selectable wideband measurements (AFR or Lambda)
• Compatible with 16v vehicle systems

0-100 PSI Liquid-Filled Pressure Gauge (1/8th NPT)

• Black Stainless Steel Case
• Silicone filled for Vibration Dampening
• Acrylic Lens for clear and easy reference

10 Degree Superlock Steel Retainer Set of 100 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10in. Brake Hub with Bearing Kit; 3;500-lb. Axles; 5 on 4-1/2in. Bolt Pattern

• Axle Rating 3500 lbs.
• Wheel Size 13 To 15 in.
• Stud Size 1/2 in.

10 Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

1.125" Tall Polylock Set for High Energy Rockers w/ 7/16" Stud

High Energyâ„¢ Aluminum Polylocks with 7/16" Stud diameter.

2.5 Gal. Polished Tank w/ Viair 444c black compressor, 1/4" & 3/8" fittings & tank mounting hardware

• 2.5 Gallon Polished Aluminum Tank
• Viair 444c Black Compressor
• 1/4 Inch And 3/8 Inch Tank Fittings And Tank Mounting Hardware

All American 2-1/8" Fuel Level Gauge (1975-2010 Ohm)

• 75-10 OHM
• Curved Glass Lens
• Stainless Radial Bezel

ANALYZER/TESTER HANDHELD

• Battery CCA Range - 0-1600
• V-Drop Technology
• Perfect Tool Box Tester

Annealed Stainless Steel Tubing

• Shipped in Straight Lengths Only

Autocross Yellow 2-5/8" Air Pressure Gauge

• Push-button calibration
• Pressure transducer included
• Easy to read 2 5/8" size