Performance Parts

GAUGE; TACHOMETER; 5in.; 10K RPM; PEDESTAL W/EXT. SHIFT-LITE; SPORT-COMP

• 12 And 16V Compatible
• Optimize Your Engines Power Band
• User-Programmable Shift Light

Magnetic Pickup for all MSD Billet Distributors

• Replacement maintenance-free magnetic pickup
• Found in all Pro-Billet Distributors

Radiator Hose Fitting 1.75 Inch - Fits Frostbite Engine Swap Radiators

• Sold Individually
• Made in the USA
• Fittings come with O-ring for superior sealing

Round Push-in Breather Look PCV Billet Aluminum Polished

Edelbrock part #4407 Billet Polished Aluminum Breather with 90 deg.

7 BAR Stainless Steel MAP Sensor Kit

• Accurate with 1% margin of error.
• Includes 1/8" NPT to -4 AN adapter.
• Weather resistant connector and pins included

All American 3-3/8" Speedometer Gauge

• 140 MPH
• Stainless Radial Bezel
• Curved Glass Lens

Autocross Gray 2-1/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Small 2 ⅛" hole size
• Push-button calibration

AutoCross Gray 2-5/8" Short Sweep Water Temp Gauge

• Flat glass lens.
• 2 5/8" Short sweep
• Matte-black performance bezel

Classic Series Rear Brake Kit

• Red Powder Coated Finish
• Slot, Dimpled, Zinc Plated Rotor
• Stainless Braided Brake Hoses

Coupler

• Connects 2-1/2 inch diameter tubes
• 3 inches long
• Connects tubing to fit custom applications

Dual Taper 9.250" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Gate Plate

• Sold Individually
• Replacement Part
• Forward Pattern

GAUGE; NITROUS PRESS; 2 5/8in.; 1600PSI; DIGITAL STEPPER MOTOR; ULTRA-LITE

• 12 And 16V Compatible
• Incl. Wiring Harness
• Incl. Mounting Hardware/Instructions

GAUGE; NITROUS PRESSURE; 2 1/16in.; 1600PSI; DIGITAL STEPPER MOTOR; NV

• Incl. Wiring Harness
• Incl. Mounting Hardware/Instructions
• 12 And 16V Compatible

GAUGE; NITROUS PRESSURE; 2 1/16in.; 1600PSI; DIGITAL STEPPER MOTOR; ULTRA-LITE

• 12 And 16V Compatible
• Incl. Wiring Harness
• Incl. Mounting Hardware/Instructions

GAUGE; OIL PRESS; 2 1/16in.; 120PSI; STEPPER MOTOR W/PEAK/WARN; SLVR/CHRM; SPEK

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

GAUGE; OIL PRESSURE; 2 1/16in.; 100PSI; DIGITAL STEPPER MOTOR; ES

• Domed Lens
• Quality Construction
• Black Chrome Bezel

GAUGE; SPEEDO; 5in.; 200MPH; ELEC. PROGRAM W/LCD ODO; ULTRA-LITE

• 12 And 16V Compatible
• Simple Push Button 2 Mile Drive Calibration
• Incl. Mounting Hardware/Instructions

High Energy 212/212 Hydraulic Flat Cam K-Kit for International Harvester 304-392

K-KIT - Complete Kit Includes: Camshaft, Lifters, Valve Springs, Retainers, Valve Locks, Valve Stem Seals, Timing Chain Set, Assembly Lube (in flat tappet applications), Decals and Instructions.

Hi-Tech 7.000" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Park Brake Cable

• Attaches to OE Front Cable Section
• Direct Fit, No Cutting Required
• Stainless Steel Cable with a Premium Housing for Long Cable Life

Performer Series and Thunder AVS Carburetor Metering Rods .065 x .037" (Qty 2)

The Edelbrock Metering Rods .065 X .037 Pair

Replacement Timing Chain for 3110, 3104, 3125, 3122 and 3130 Hi-Tech Timing Sets

Ideal for all street performance and race applications.

SHIFT LIGHT CONTROLLER; DIGITAL PRO SHIFT

• Adjustable By 10 RPM Increments
• Digital RPM Display
• Features Peak RPM Recall