Performance Parts

Non Stick Fuel Bowl Gaskets

Non Stick Fuel Bowl Gaskets - For most carburetors with a metering block (4150/4160 style, Q, RQ, SS, HR, QfX Series) - Sold in pack of 10

SPE-8132 Spectre Conical Filter

• High flow filter designed to fit 3 inch, 3 1/2 inch and 4 inch tubes (included adapter rings)
• Factory pre-oiled and ready to use
• Red colored filter media

Specialty Muffler Heavy Duty (Truck) 3in Center Inlet/ 3in Center Outlet 6.75in Round x 24in Long Body

• Universal muffler. Reversible design.
• Long body design works well on SUV and truck applications
• Alternate muffler with Notched necks is 400500. Use 1" wide band clamps 18330.

0 Degree Retard Module

Zero degree module for use when a module is not used.

10-1/4" - 11-1/4" Deep Tank (10-180 Ohm)

Quality, Service and Value are not new to us.

10 AMP Microswitch w/ 5/8 in Mount

These switches can be used for many things such as nitrous activation, engaging a transbrake or a rollstop.

10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess, -.050" Height

This Steel Super Lock with .050 install height features a lash cap recess, 10& deg

10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Tool Steel Retainer Set of 12for All Valves w/ 1.250" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Lightweight Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Tool Steel Retainer for All Valves w/ 1.095" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer for All Valves w/ 26955, 26956 and 26957 Springs

COMP Cams Lightweight Tool Steel Retainers for #26955, #26956, #26957 springs provide the best of all valve train benefits: light weight, as well as exceptional strength and wear characteristics.

1.125" Tall Polylock for High Energy Rockers w/ 7/16" Stud

High Energyâ„¢ Aluminum Polylock with 7/16" Stud diameter.

1.550" High Lift Dual Valve Springs for Racing Applications

1.520" OD Dual Spring

16 Pulse Generator

• Designed for Ford transmissions with cable drives. Requires a driven gear.

16 Pulse Generator Adapter

• Enable to use of a GM/Chrysler signal generator to a Ford or Tremec transmission

16 Pulse Generator Wire Harness

• Wiring harness only

16 Pulse Metric Generator

• For transmissions with cable drives with 22x1.5mm metric thread

1 Metal Body Viton Valve Seal for .500" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .546"

1 Metal Body Viton Valve Seal for .500" Guide Size, 5/16" Valve Stem

5/16 X .500 Viton Metal Body Seal .546 OD

24 Auto-Fit Replacement Socket

• Black Anodized Finish

28" FLO Tank w/ Viair 444c Compressor, 1/4" & 3/8" fittings and tank mounting hardware

• 18 Inch FLO Aluminum Tank
• Viair 444c Chrome Compressor
• 1/4 In And 3/8 In Tank Fittings And Tank Mounting Hardware

2in. (10 Pack) Torca Performance Exhaust Band Clamps

• Pack of 10
• Durable stainless steel
• High-strength reaction block

3/8" Replacement Compression Sleeve

• Replacement Brass Compression Sleeve for 3/8" Tubing