Performance Parts

UltraPro Hose End

• Straight, 30º, 45º, 60º, 90º, 120º, 150º, and 180º angles available

UltraPro One Way Check Valve

• Body is Anodized Aluminum

Universal Tube

• Two 6 inch straight sections with a 45 degree bend
• 4 inch outside diameter
• 0.065 inch thick 6063 aluminum alloy construction

V8 Red Steelie 5" Speedometer Gauge (140 MPH)

• V8 Red Steelie
• Stainless Low Step Bezel
• Curved Glass Lens

V8 Speedster 2-1/8" Fuel Level Gauge

• 75 ohms empty, 10 ohms full
• Small 2 ⅛" hole size
• Flat glass lens

VALVE SPRING, 1.683" DRAG RACE

Set of 16 Drag Race Springs.

Valve Spring Shim Kit - 1.437" OD, .645" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Vapor Block Fuel Line Sleeve 0.375" (10mm) I.D. x 36" 010671

• Use On Fuel Lines To Prevent Vapor Lock
• Easy To Cut To Size
• 3/8 in. -10 mm I.D. X 36 in

Velocity Black 2-5/8" Transmission Temperature Gauge

• Temperature sending unit included
• Installation hardware included
• Full sweep provides increased accuracy

Velocity Black 4-5/8" Speedometer Gauge w/ Info Screen

• Velocity Black 4 5/8" Speedometer with information screen, 160 MPH, with a Black Low Step Bezel and a Flat Glass Lens.

Velocity White 2-5/8" Outside Air Tempature Gauge

• Installation hardware included
• Easy to read 2 5/8" size
• Pushbutton calibration

Vintage 2-5/8" Transmission Temperature Gauge

• Easy to read 2 5/8" size
• Installation hardware included

40 Series Chambered Muffler

• No internal packing to blowout
• Aggressive Sound Exterior Exhaust Tone
• Durable fully welded 16 gauge aluminized steel

Accelerator Pump Nozzle Kit Includes: .024", .033", .043" Nozzles and Gaskets

The Edelbrock #1475 accelerator nozzle is designed for use with Edelbrock Performer Series as well as Thunder Series AVS carbs.

AEM DryFlow Air Filter

• Engineered to deliver enhanced horsepower & acceleration for a more exhilarating driving experience every time you hit…
• Features a performance-focused filter top that maximizes incoming airflow, helping your engine breathe deeper and run…
• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand…

Apollo Mounting Bracket

• Provides secure mounting
• Includes L bracket and saddle bracket
• Includes hose clamp and other mounting hardware

Float

• Genuine Holley Quality Parts

Non Stick Fuel Bowl Gaskets

Non Stick Fuel Bowl Gaskets - For most carburetors with a metering block (4150/4160 style, Q, RQ, SS, HR, QfX Series) - Sold in pack of 10

Replacement Air Filter

• Designed to increase horsepower
• Emissions legal in all 50 States
• Will not void vehicle warranty

SPE-8132 Spectre Conical Filter

• High flow filter designed to fit 3 inch, 3 1/2 inch and 4 inch tubes (included adapter rings)
• Factory pre-oiled and ready to use
• Red colored filter media

Specialty Muffler Heavy Duty (Truck) 3in Center Inlet/ 3in Center Outlet 6.75in Round x 24in Long Body

• Universal muffler. Reversible design.
• Long body design works well on SUV and truck applications
• Alternate muffler with Notched necks is 400500. Use 1" wide band clamps 18330.

0 Degree Retard Module

Zero degree module for use when a module is not used.

10 AMP Microswitch w/ 5/8 in Mount

These switches can be used for many things such as nitrous activation, engaging a transbrake or a rollstop.

10 AN Cap

• Available for Any Plumbing Situation And Many Custom Applications

10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess, -.050" Height

This Steel Super Lock with .050 install height features a lash cap recess, 10& deg