Performance Parts

ID Spring Locator Set of 12 - 1.300" OD, .570" ID, .060" Thickness

ID Spring Locator - 1.300" OD, .570" ID, .060" Thickness - Set of 12

ID Spring Locator Set of 16 - 1.510" OD, .630" ID, .060" Thickness

ID Spring Locators for 26120

ID Spring Locator Set of 16 - 1.600" OD, .570" ID, .060" Thickness

Spring seats for #26055 with .570" guide.

Ignition Dual Wall Heat Shrink Tube Kit 106 pcs. Contains, Red and Black sleeves tube sizes from 1/8" up to 1/2" in 3" Lengths. Made of Polyolefin, Waterproof, Shrink Ratio 3:1, Rated up to 600V, and Temp. rated at -49° to 257°F

• 106 Piece Dual Wall Shrink Tube (waterproof)
• Tube Sizes from 1/8" to 1"
• Material: Polyolefin (Red and Black)

Ignition Wire Marker - 8mm - 8.8mm

Identify your wires to eliminate firing order errors.

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

IN-LINE FUEL PULSE DAMPER

• Fittings included for damper/regulator’s and direct mount dampers
• Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
• Assembled and tested in the USA

Inner Bearing Cone-10;000 lbs. Axles

• Industry Number 387A
• Pairs With Inner Bearing Race
• 10000 lbs. Weight Capacity

Inner Bearing Cone-12;000 to 16;000 lbs. Axles

• Industry Number 3984
• Pairs With Outer Bearing Cone
• 12000 To 16000 lbs. Weight Capacity

Inner/Outer Bearing Cone-2;000 to 3;500-lb. Axles

• Industry Number L44649
• Pairs With Bearing Race PN[L44610]
• 1-1/16 in. Shaft Diameter

Inspection Cover - BB Mopar

• Inspection or Dust Cover
• Powder-coated black steel
• Included with LK6000K

Intake Valve for #61459, #61559 & #61555 Cylinder Heads

The Edelbrock #97040 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60379 Cylinder Heads

The Edelbrock #9768 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Inverted flare fitting 7/16-24 for 3/16 inch line

• Manufactured to OE specifications

Inverted flare fitting 9/16-18 for 3/16 inch line

• Manufactured to OE specifications

Inverted Flare to AN Adapter Fitting

• Note the "L" Added to the Part Number for Long Threads - Just Before The "ERL"

Inverted Flare to AN Adapter Fitting

• 7/16"-24 Inverted Flare Male to -6 AN Male
• Adjustable Oil Restrictor Fittings for the Oil Feed (Flare Jet -4 AN Style - Similar to Nitrous Flare Jets)

Inverted Flare to AN Adapter Fitting

• Adjustable Oil Restrictor Fittings for the Oil Feed (Flare Jet -4 AN Style - Similar to Nitrous Flare Jets)

IronSport Brake System Rear

• Single Piston Caliper
• Silver Zinc-Plated Finish
• Integral Park Brake in Caliper

IronSport Brake System Rear

• Single Piston Caliper
• Silver Zinc-Plated Finish
• Integral Park Brake in Caliper

Jet Assortment Kit w/Billet Plate 60-69

• Genuine Holley Quality Parts

Jet Assortment Kit w/Billet Plate 70-79

• Genuine Holley Quality Parts

Jet Assortment Kit w/Billet Plate 70-80

Jet Assortment Kit with billet plate.

Kill Switch for MSD 12 and 20 Amp Pro Mags

The switch is rated at 15 amps so it can handle the power of the Pro-Mag 12.