Performance Parts

LS/LT High-Mount Accessory Drive Bracket - Passenger's & Driver's Side Brackets

• The most cost effective LS bracket solution on the market!
• Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
• A/C bracket accepts GM R4 compressor (Sanden version now available)

Machined Steel 7 Degree, 5/16", Single Groove Race Lock

Includes 1 Pair of Machined Steel Race Locks: 1 Groove, 7& deg

Machined Steel 7 Degree, 5mm, Single Groove Race Lock

Machined Steel 7& deg

Machined Steel Set of 100 - 7 Degree, 3/8", Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Machined Steel Set of 16 - 7 Degree, 5/16", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Magnetic Proximity Sensor

The Magnetic Proximity Sensor will respond to pulse signals across a 1/16" air-gap between the sensor tip and disk-rotor, IRS-CV joint bolt-heads or notched brake-drum edge.;<br clear="none" xmlns="" /><br clear="none" xmlns="" />It is useful on trans-axle setups or transmissions without mechanical speedometer cable connection.;<br clear="none" xmlns="" /><br clear="none" xmlns="" />Using a stock GM Speed Sensor - 700R, 4L60, etc.

Magnet Sleeve (only) for 1864A Ignitor Kit

• Replacement Magnet Sleeve for PerTronix 1864A (Service Part Only)
• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1867A Ignitor Kit

• Replacement Magnet Sleeve for PerTronix 1867A (Service Part Only)
• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1868 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1868 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for MA-141 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix MA-141 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnum 7.150" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.15" Long, .08" Wall, 5/16" Diameter Pushrod Set 12

The Magnum 5/16" and 3/8" pushrods offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.400" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.450" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.600" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.295" Long, .080 Wall, 5/16 Diameter Pushrod - Set of 16

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.700" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Polylock for 3/8" Rocker Stud

3/8" Magnum Poly Lock

Magnum Polylock for 7/16" Rocker Stud

7/16" Magnum Poly Lock-1

Magnum Rocker Stud Set w/ 7/16" Base Thread and 7/16" Rocker Thread

COMP Cams takes pride in having the finest Rocker arm Studs available on the market.

Manifold Absolute Pressure Sensor #3547 Upgrade For ProFlo4 Boosted Applications

Edelbrock part #3547 T-MAP Sensor Conversion Harness Kit is to install a single combination Inlet Air Temp (IAT) & Manifold Absolute Pressure (MAP) sensor in place of existing separate IAT and MAP sensors.

MAP Sensor 3-bar for blown/turbo applications

• Applications up to 30lbs of boost.

Marine 32oz Case (6pack)

BOOSTane?s Marine formula is the team getting back to its roots.

Marine 5 Gallon Pail

BOOSTane?s Marine formula is the team getting back to its roots.

Master Disconnect Switch

• Splices into battery cable to provide a direct power shut-off
• Continuous Amp Rating Of 20 Amps At 12 Volts
• Momentary Rating Of 125 Amps At 12 Volts