Performance Parts

19-1/4" - 20-1/4" Deep Tank (0-30 Ohm)

Quality, Service and Value are not new to us.

2.5 Gallon Aluminum Air Tank; (4) 1/4 in. face ports; 6 in. D X 20 in. L, light weight, 200PSI maximum operating pressure

• [4] 1/4 In Face Ports
• Dimensions Of 6 In D X 20 In L
• Raw Aluminum

4 AN Caps

• Blue Anodized Aluminum

7mm 7 Degree Tool Steel Retainer for 26056 Springs in our 9709-KIT Spring Kit

COMP Cams Lightweight Tool Steel Retainers provide the best of all valve train benefits: light weight, along with exceptional strength and wear characteristics.

7 Tool Steel Retainer Set of 12, 11/32" Valve w/ 26926 Springs in Non-LS Engine

These new Tool Steel Retainers from COMP Cams have a 7& deg

All American Trad. 2-5/8" Full Sweep Water Temp Gauge

• Installation hardware included
• Easy to read 2 5/8" size
• Analog

All American Tradition 2-1/8" Air Pressure Gauge

• Small 2 1/8" hole size
• Pushbutton calibration
• Pressure transducer included

All American Tradition 2-5/8" Air Pressure Gauge

• Pressure transducer included
• Easy to read 2 5/8" size
• Pushbutton calibration

AutoCross Gray 2-1/8" Water Temperature Gauge

• Installation hardware included

AutoCross Gray 2-5/8" Short Sweep Water Temp Gauge

• Flat glass lens.
• 2 5/8" Short sweep
• Matte-black performance bezel

Auto-Flex Hose - Size 8 - 20 Ft. Length

• Textile Braid In Hose Liner

Battery Charger Accy

CTEK Comfort Indicator Panel

Brakes Premium Aluminum 4-Lug Wheel Spacers – 4x100, 4x108, 4x114.3 Bolt Patterns

• Widen Track
• 6061-T6 Aluminum
• Sold in Pairs

Distribution Block

• Wrench Hex for Easy Assembly & Maintenance

Dual Taper 8.700" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 8.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Elite Race Dual Valve Springs: 1.551" OD, 2.000 IH, .800 Lift, 502 LBS/IN, SR - Set

COMP Cams' 26097 dual valve springs are a product of innovative design and superior craftsmanship.

FITTING; ADAPTER; 3/8in. NPT MALE; EXTENSION; BRASS; FOR AUTO GAGE MECH. TEMP.

• Temperature Extension
• Manufactured From High Quality Brass
• For Mechanical Temperature Gauges Only

FITTING; THERMOCOUPLE COMPRESS; 3/16in.; 1/8in. NPTF MALE; STAINLESS; INCL WELD

• Incl. 3/16 in. Thermocouple Compression Fitting To 1/8 in. NPMT
• Incl. 1/8 in. NPFT Bung
• Manufactured From High Carbon Steel

GAUGE; AIR LOCKER PRESS; 2 1/16in.; 150PSI; MECHANICAL; ULTRA-LITE

• No Electrical System Required
• Mechanical Movement Provides Accuracy And Durability
• Incl. 1/8 in. Nylon Line; 1/8 in. NPT Adapter

GAUGE; BOOST; 2 1/16in.; 35PSI; STEPPER MOTOR W/PEAK/WARN; BLACK/BLACK; SPEK-PRO

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

GAUGE BRACKET KIT; 2 1/16in.; ALUMINUM; QTY 3

• Includes 3 Aluminum Mounting Brackets
• Includes 6 Lockwashers
• Includes 6 Aluminum Thumb Nuts

GAUGE; FUEL LEVEL; 2 1/16in.; 0-280O PROGRAMMABLE; WHITE; PRO-CYCLE

• Vibration And Water Resistant
• Programmable Anywhere Between 0-280 OHMS
• Incl. Gauge Mounting Hardware And Instructions

GAUGE; FUEL PRESS; 2 5/8in.; 100PSI; STEPPER MOTOR W/PEAK/WARN; PHANTOM II

• 12 And 16V Compatible
• Incl. Wiring Harness
• One-Touch Peak Recall

GAUGE MOUNT; 2 1/16in.; PEDESTAL W/CARBON FIBER CUP

• Gauge Mounting Cap