Performance Parts

Inner Bearing Cone-12;000 to 16;000 lbs. Axles

• Industry Number 3984
• Pairs With Outer Bearing Cone
• 12000 To 16000 lbs. Weight Capacity

Inner/Outer Bearing Cone-2;000 to 3;500-lb. Axles

• Industry Number L44649
• Pairs With Bearing Race PN[L44610]
• 1-1/16 in. Shaft Diameter

Inspection Cover - BB Mopar

• Inspection or Dust Cover
• Powder-coated black steel
• Included with LK6000K

Intake Valve for #61459, #61559 & #61555 Cylinder Heads

The Edelbrock #97040 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60379 Cylinder Heads

The Edelbrock #9768 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Inverted flare fitting 7/16-24 for 3/16 inch line

• Manufactured to OE specifications

Inverted Flare to AN Adapter Fitting

• Note the "L" Added to the Part Number for Long Threads - Just Before The "ERL"

Inverted Flare to AN Adapter Fitting

• 7/16"-24 Inverted Flare Male to -6 AN Male
• Adjustable Oil Restrictor Fittings for the Oil Feed (Flare Jet -4 AN Style - Similar to Nitrous Flare Jets)

Jet Assortment Kit w/Billet Plate 60-69

• Genuine Holley Quality Parts

LS Airforce Intake Fastener Kit For Pn 2701 And Pn 2702

This is a replacement fastener kit for your PN 2701-2702 AirForce Manifold.

LS/LT High-Mount Accessory Drive Bracket - A/C, P/S & Alt Brackets

• The most cost effective LS bracket solution on the market!
• A/C bracket accepts GM R4 compressor (Sanden version now available)
• Ideal for crate engines, take out motors and engine builders!

Machined Steel 7 Degree, 5/16", Single Groove Race Lock

Includes 1 Pair of Machined Steel Race Locks: 1 Groove, 7& deg

Machined Steel 7 Degree, 5mm, Single Groove Race Lock

Machined Steel 7& deg

Machined Steel Set of 100 - 7 Degree, 3/8", Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Magnetic Proximity Sensor

The Magnetic Proximity Sensor will respond to pulse signals across a 1/16" air-gap between the sensor tip and disk-rotor, IRS-CV joint bolt-heads or notched brake-drum edge.;<br clear="none" xmlns="" /><br clear="none" xmlns="" />It is useful on trans-axle setups or transmissions without mechanical speedometer cable connection.;<br clear="none" xmlns="" /><br clear="none" xmlns="" />Using a stock GM Speed Sensor - 700R, 4L60, etc.

Magnum 7.150" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.15" Long, .08" Wall, 5/16" Diameter Pushrod Set 12

The Magnum 5/16" and 3/8" pushrods offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.400" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.450" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.600" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.700" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Polylock for 3/8" Rocker Stud

3/8" Magnum Poly Lock

Magnum Polylock for 7/16" Rocker Stud

7/16" Magnum Poly Lock-1

Manifold Absolute Pressure Sensor #3547 Upgrade For ProFlo4 Boosted Applications

Edelbrock part #3547 T-MAP Sensor Conversion Harness Kit is to install a single combination Inlet Air Temp (IAT) & Manifold Absolute Pressure (MAP) sensor in place of existing separate IAT and MAP sensors.

Marine 32oz Case (6pack)

BOOSTane?s Marine formula is the team getting back to its roots.