Performance Parts

Hi-Tech Oil Restricting 6.900" Long, .080" Wall, 5/16" Diameter Pushrod

COMP Cams Hi-Techâ„¢ Oil Restricting pushrods feature 0.050" oil holes, which are half the size of standard Hi-Techâ„¢ pushrods.

Hi-Tech One-Piece 7.900" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 8.300" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 8.300" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech One-Piece 8.650" Long, .135" Wall, 3/8" Diameter Pushrod Set

37% stiffer than standard .080" wall pushrods.

Hi-Tech One-Piece 9.150" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 9.150" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 3/8" Rocker Thread

3/8 HI-Tech Stud

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 7/16" Rocker Thread

7/16 HI-Tech Stud

Hi-Temp Shrink Tubes 6mm x 200' 010838B200

• 3 To 1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

Hose Separator

• 6061-T6 Aluminum
• Blue Anodized
• Fits 8 AN ProClassic Hose

Hose Separator

• 6061-T6 Aluminum
• Fits 12 AN ProClassic Hose
• Red Anodized

Hose & Tubing Separator

• For Professional Engine Look

Hose/Wire Wrap

• Easy Installation And Removal
• Lightweight
• Self-Wrapping

Hot Rod 2-1/8" Brake Pressure Gauge

• Small 2 1/8" hole size
• Completely electric
• Pushbutton calibration

Hot Rod 2-1/8" Exhaust Gas Tempature Gauge

• Push button calibration
• Completely electric
• Small 2 1/8" hole size

Hot Rod 4-5/8" Speedometer Gauge with Information Screen

• Flat Glass Lens
• Resettable trip odometer
• Display Options:

Hot Rod Series 2-5/8" Brake Pressure Gauge - Full Sweep

Quality, Service and Value are not new to us.

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

Hydraulic Release Bearing Kit

• Fits GM LS T-56, GM T-56 Magnum or GM Super Magnum 6 speed transmissions with LS or LT engines
• Aluminum Construction and OE (Original Equipment) like fitment offer maximum functionality and strength
• Ideal for engine swaps & vehicles that use after-market master cylinders w/ the OEM clutch release bearing

ID Spring Locator - 1.100" OD, .470" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.300" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.400" OD, .520" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.540" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

INFRA RED EXTERNAL PRINTER; 12V

• Uses Standard 58mm Thermal Paper
• Incl. AC Power Adapter And 110V Cigar Lighter Power Adapter
• 6 in. x 4.5 in. x 3.5 in.

Inner Bearing Cone-10;000 lbs. Axles

• Industry Number 387A
• Pairs With Inner Bearing Race
• 10000 lbs. Weight Capacity