Performance Parts

Dual Taper 9.400" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.650" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.650" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.750" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dust Cap- 2;000-3;500-lb. Axles

• Axle Dust Cap

EAS Wideband Input

• EAS Accessory
• Plug and Play installation
• Compatible with Trinity and Insight devices

Easy Form Hardline Tubing Kit

• Tube Nuts Included: (10) 3/8"-24, (2) 7/16"-24, (2) 9/16"-18, (2) 1/2"-20

Easy Loom Split Wire Sleeve 1.5" x 100' 010657B100

• Add A Clean And Classy Look
• Tested to 302°F/150°C
• Self-extinguishing

EFI Fuel Pressure Regulator -10 AN (180 GPH) in Blue/Clear Finish

Edelbrock fuel pressure regulators #174022 are machined from aircraft quality aluminum for those who demand the best.

Elbow 45 2.5in O.D. T-304 Stainless Steel

• Universal 45 degree elbow
• Mandrel bent
• Use 18004 3" wide band clamps

ELECTRONIC VOLTAGE REGULATOR

ACCEL Motorcycle electronic voltage regulators do not require any re-wiring or special mounting.

Elite Breather - Side Mount

Edelbrock part #4201 Elite Series Breather is a side mount bolt on design.

Endure-X Solid Roller Lifter w/ .842" Diameter, Centered Pushrod Seat

Solid Roller lifter with cutaway body with oil band and centered Pushrod seats, single lifter

Engine Camshaft Bolt

Absorb crankshaft harmonics to guard against valve train instability.

Engine Valve Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Engine Valve Spring

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Engine Valve Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

ER-1 Disc Brake Pad

Decades of experience, continuous research and development, and dedication to bringing the highest quality premium friction products have led to Talon(R) Rotors.

Exhaust Header Bolts #8540, 3/8"-16 X 3/4", Black Oxide W/ Allen Socket

Edelbrock Exhaust Header Bolt Kit #8540 contains a set of 12 high-quality black oxide steel flanged bolts for universal applications that require a 3/8-16 thread pitch and 3/4-inch length.

Exhaust Tip

• Weld-On
• Angle Cut Design
• Polished split oval rolled edge tip

Exhaust Tip

• Premium Quality
• Clamp On
• Polished

Exhaust Valve for #60579, #61579 & #61599 Cylinder Heads

The Edelbrock #9783 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Exhaust Valve for #60679, #60699, #61669 & #61649 Heads

The Edelbrock #93772 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Exhaust Valve for #60809 & 60819 Cylinder Heads

The Edelbrock #93782 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Exhaust Valve for #77919, #77929, #77939 & #77949 Heads

The Edelbrock #93776 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.