Performance Parts

SS4+ Brake System Rear

• CNC Machined from US Sourced Forged or Billet Aluminum
• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure

0.250 Fire Rated Hose - 8ft

.250 FIRE RATED HOSE-8FT

1000 Universal

• Requires Only two Measurements To Determine Kit
• Easy To Install With Fully-Illustrated Installation Manual
• 3.00 Min. Diameter And 5.50 Max. Length

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 5.50 Min. Diameter And 8.50 Max. Length

100 MICRON REPLACEMENT FILTER ELEMENT 76 SERIES

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

10 Degree Superlock Retainer Set of 100 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Titanium Retainer Set of 12 for 1.437"-1.500" OD Double Springs

Upgrading to these 10& deg

10 Degree Titanium Retainer Set of 12 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Degree Titanium Retainer Set of 4 for 1.437"-1.500" OD Double Springs

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as stong as most steel ones.

10 Degree Titanium Retainer Set of 4 for 26095 Beehive Spring

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as stong as most steel ones.

10ORB to 3/4 in Hose Barb Aluminum Fitting, Black

• Mishimoto Lifetime Warranty

10 Steel Retainer for 26120 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Steel Retainer for 983 Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer for 26955, 26956, and 26957 Springs

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and stronger than most Steel ones.

10 Tool Steel Retainer for All Valves w/ 26056 Springs

These new lightweight 1.185" spring diameter Tool Steel Retainers from COMP Cams have a 10& deg

12 AN Port Plug O-Ring

These parts are included with your purchase of an RHS Race Block but are also available for purchase separately.

15' Urathane Hose

• Limited Warranty 2 Year
• Made In USA
• Urethane Hose 15 ft.

16 Pulse VW Signal Generator

• Speedometer cable drives on the passenger side front wheel hub

18" FLO Tank w/ Viair 444c black Compressor, 1/4" & 3/8" fittings and tank mounting hardware

• 18 Inch FLO Aluminum Tank
• Viair 444c Black Compressor
• 1/4 In And 3/8 In Tank Fittings And Tank Mounting Hardware

18 in FLO Tank Raw end caps with brushed tube Includes two mounting brackets

• Designed For A Clean And Impressive Air Management Setup

1/8" NPT Hex Head Plug

• Black Anodized

1 Black Viton Valve Seal for .494" Guide Size, 11/32" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

1 PTFE Valve Seal for .530" Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - .530" Guides (.630" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>