Performance Parts

Universal Air-to-Air Race Intercooler Core 20in x 11in x 3.5in

• Robust bar-and-plate construction
• Designed for maximum flow and heat dissipation
• Arrives ready for fabrication

Universal Air-to-Air Race Intercooler Core 22 in x 9.25in x 3.25in

• Robust bar-and-plate construction
• Designed for maximum flow and heat dissipation
• Arrives ready for fabrication

Universal Air-to-Air Race Intercooler Core 24in x 13in x 3.5in

• Robust bar-and-plate construction
• Designed for maximum flow and heat dissipation
• Arrives ready for fabrication

Universal Air-to-Air Race Intercooler Core 27 in x 9.85in x 4.5in

• Robust bar-and-plate construction
• Designed for maximum flow and heat dissipation
• Arrives ready for fabrication

Universal Catch Can Hose 3/4 in x 4ft

• 4 feet of 3/4-in hose compatible with most PCV systems
• Durable hose material resistant to heat and chemicals for a worry-free installation
• Meets SAE J30R7 requirements

Universal Transmission Controller

• Includes transmission controller and clearly labeled auxiliary harnesses for simple installation
• TC Tuner features Setup Wizard with base calibrations and capability to fully customize tune
• Compatible w/ most iOS & Android mobile devices

Unsealed Battery Management System Satellite

• Unsealed Satellite Modules are connected to their Master via a high-speed serial interface (isoSPI)
• Unsealed Satellite Modules allows for custom Battery Packs and integration into a sealed module
• Unsealed Satellite modules are Intended for installations into sealed custom battery packs

V8 Red Steelie 2-5/8" Air Pressure Gauge

• Installation hardware included
• Pressure transducer included
• Full sweep provides increased accuracy

V8 Speedster 2-1/8" Air Fuel Ratio Gauge

• Wideband controller included
• Push-button calibration
• Small 2 ⅛" hole size

V8 Speedster 2-1/8" Cylinder Head Temperature Gauge

• V8 Speedster
• Standard stainless low step bezel
• Curved glass lens

Valve Spring Shim - 1.480" OD, .765" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Vapor Block(TM) Fuel Line Sleeve - 0.375" (10mm) I.D. x 12"

• Use On Fuel Lines To Prevent Vapor Lock
• Easy To Cut To Size
• 3/8in. (10mm) x 12in.

Vapor Guard™ Adapter

• Black Anodized Finish

Vapor Guard™ Hose

• Carburetion Hose – Rated Maximum 50 PSI (not for use with fuel injection systems)

VCU275 Programmable Electric Vehicle Control Unit

• Full Integration of all EV sub-systems under one controller
• Accessory control of cooling pumps, cooling fans, lights and more
• Supports up to 2 Drive Motors and up to 1200V AEM BMS18 Systems

Velocity Black 2-1/8" Cylinder Head Tempature Gauge

• Push button calibration
• Small 2 1/8" hole size
• Completely electric

Velocity Black 2-5/8" Brake Pressure Gauge

• Pushbutton calibration
• Easy to read 2 5/8" size
• Completely electric

Velocity Black 2-5/8" Cylinder Head Tempature Gauge

• Push button calibration
• Completely electric
• Easy to read 2 5/8" size

Velocity Black 2-5/8" Cylinder Head Tempature Gauge

• Completely electric
• Push button calibration
• Easy to read 2 5/8" size

Velocity Black 2-5/8" Transmission Temperature Gauge

• Easy to read 2 5/8" size
• Installation hardware included

Velocity White 2-1/8" Brake Pressure Gauge

• Completely electric
• Small 2 1/8" hole size
• Pushbutton calibration

Velocity White 2-5/8" Full Sweep Water Temp Gauge

• Easy to read 2 5/8" size
• Push-button calibration
• Temperature sending unit included

Velocity White 2-5/8" Transmission Temperature Gauge

• Pushbutton calibration
• Installation hardware included
• Easy to read 2 5/8" size

Velva Ride Engine Stabilizer

This Velva Ride engine stabilizer is the most cost-effective way to smooth out the ride of your 1980 to 2000 FXR and FLT.

Velva Ride Engine Stabilizer Kit

This Velva Ride engine stabilizer is the most cost-effective way to smooth out the ride of your 1980 to 2000 FXR and FLT.