Performance Parts

DOT4 High Performance Brake Fluid, 16.9oz/500ml Bottle

• Minimum Dry Boiling Point: 608°F (320°C)
• Bottle Size: 16.9oz (500ML)
• Single Bottle

DUAL SPRING W/ DAMPER, 1.560 OD, 1.900 IH, .740 LIFT, 400 LBS/IN, HR

Extreme+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Floor & Tunnel Shield II 12" x 21"

• 10 mil dimpled aluminum face
• Only 3/16" thick
• Peel and stick adhesive backing

Fuel Filter Replacement Element

• Includes O-rings

GAUGE; BOOST; 2 1/16in.; 100PSI; STEPPER MOTOR W/PEAK/WARN; SLVR/CHRM; SPEK-PRO

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

GAUGE; BOOST; 2 1/16in.; 35PSI; STEPPER MOTOR W/PEAK/WARN; BLK/CHROME; SPEK-PRO

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

GAUGE; SPEEDO; 3 3/8in.; 260MPH/260KM/H; ELEC PROGRAM; DIGITAL; SLVR W/RED LED

• E-Z View Digital LED Display
• Programmable w/EZ Cal System-MPH Or KM/H
• Simple Push Button 2 Mile Drive Calibration

GAUGE; SPEEDOMETER; 3 1/8in.; 160MPH; ELEC. PROG. W/LCD ODO; FORD MASTERPIECE

• Ford Racing Officially Licensed Product
• 12 And 16 Volt Compatible
• Reprogram Any Time To Accommodate Changes

GAUGE; SPEEDOMETER; 3 3/8in.; 50MPH; GPS; MARINE CARBON FIBER

• UV Protected Paint On Dial Pointer
• Requires 5283 GPS Antenna
• 12 Month Limited Warranty

GAUGE; VAC/BOOST; 2 1/16in.; 30INHG-30PSI; DIGITAL STEPPER MOTOR; C2

• Futuristic Red Point Look
• 1 Year Limited Warranty
• 12 And 16 Volt Compatible

G/Stock 2-1/8" Volt Gauge

• Push-button calibration
• Easy to read 2 1/8" size
• Installation hardware included

Hi-Tech 10.250" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 9.750" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech One-Piece 8.280" Long, .135" Wall, 3/8" Diameter Pushrod Set of 8

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hose & Tubing Separator

• For Professional & Aggressive Engine Look

Nostalgia VT 2-5/8" Full Sweep Water Temperature Gauge

Quality, Service and Value are not new to us.

Power Steering Hose - Blue - Size -6 - Hose Sold By the Foot up to 50'

• Sold per foot

Race Extreme 1.635" OD Dual Spring; 1.950" Installed Height; 1 Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

SENSOR KIT; FLUID TEMPERATURE;-40-300deg.F; 1/8in. NPTF MALE; OPTIONAL; AIRDRIVE

• Solid State Data Acquisition Quality Sensor
• 8 Ft Harness

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

SS4 Brake System Rear

• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure
• 1-Piece Slot, Drilled, Zinc-Plate Rotor