Performance Parts

High Volume Fuel Rail Port Plug

• Sold each
• Fits AEM high flow fuel rails
• black anodized finish

Hi-Tech 11.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.000" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the RPM at which the engine will be run.

Hi-Tech 8.000" Long, .105" Wall, 5/16" Diameter Pushrod Set of 12

Designed to be 17% stiffer than 0.080" wall pushrods, COMP Hi-Tech .105" pushrods feature the same diameter oil holes as standard to retain full flow.

Hi-Tech 9.450" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech One-Piece 8.600" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech Rocker Stud Set w/ 7/16" Base Thread and 1/2" Rocker Thread

Hi-Tech Rocker Stud Set with 7/16" Base Thread and 1/2" Rocker Thread

Hold-Down Tab Kits (Universal 1.5" long in Black Finish (Qty 8)

The Edelbrock #44273 valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers, our Elite Series and Elite II valve covers, our Classic Series valve covers and our Victor Series valve covers.

Hose Clamp

• Attach To Supporting Structure

Hose & Tubing Separator

• For Professional Engine Look

Hose/Wire Wrap

• Easy Installation And Removal
• Lightweight
• Self-Wrapping

Hot Rod 2-1/8" Gear Select W/OD

• Hot Rod
• With Overdrive
• Curved Glass Lens

Hot Rod 2-1/8" Transmission Temperature Gauge

• Installation hardware included

HYDRAMAT (3X15) RECT - 19MM OUTLET OFFSET

• Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
• Can be folded and compressed for easy installation through a variety of fuel cell openings

Idler Bearing for Hi-Tech Belt Drive Systems

Replacement Idler Bearing for Hi-Techâ„¢ Belt Drive Systems.

Idler Pulley

• Genuine Holley Quality Parts

ID Spring Locator - 1.285" OD, .532" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .525" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .135" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .135" Thickness - Single

ID Spring Locator Set of 16 - 1.350" OD, .515" ID, .050" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

Inspection Cover

• Hardware included

Intake Valves for #60979 Cylinder Heads

The Edelbrock #9779 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

inTune i2/i3 Replacement Cable

• Works with later i1000 devices
• Plug and play design
• Easy installation

Late Model USCAR Fuel Pump Module Mounting Ring - Stainless Steel

• Available in 6061 Aluminum, Mild Steel, and 304 Stainless Steel – Choose Same Material as Fuel Tank for Easy Welding

LOWER GEAR, FOR 6502

Lower Gear for #6502 Hi-Tech Belt Drive System

LOWER SEAL,FOR 6502/6506 BELT

Lower Seal for #6502 and #6506 Hi-Tech Belt Drive