Performance Parts

V8 Speedster 2-1/8" Cylinder Head Tempature Gauge

• Push button calibration
• Completely electric
• Small 2 1/8" hole size

V8 Speedster 2-1/8" Outside Air Tempature Gauge

• Push-button calibration-
• LED lighting, choose between Warm White or Cool White- Analog .5
• Full sweep provides increased accuracy - Easy to read 2 5/8" size

V8 Speedster 2-1/8" Volt Gauge

• V8 Speedster 2 1/8" Volt Gauge with Stainless High Step Bezel Curved Glass Lens

Vacuum Hose - 11/32 x 18" OAL

• Manufactured to OE specifications

Valley Plate Gasket for BV3 5.00" Bore Spacing

Edelbrock part #7256 Valley Cover Plate Gasket is Required when using Edelbrock Big Victor 3 Valley Covers #77740, 77742 or #77744.

VALVE SPRING, 1.437" OUTER W/

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

VALVE SPRING, 1.464" OUTER W/D

1.464" OD Single Springs

VALVE SPRING, 1.565" INTER-FIT

1.565" OD Dual Springs

VALVE SPRING ASSEMBLY, 1.551"

(4) Valve Spring: (in 9900-Kit) .700 lift, 1.550 OD, .710 ID, 230# @ 1.875", 700# @ 1.200", 1.110"

VALVE SPRINGS, 0.937" INNER, B

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

VALVE SPRINGS, 0.970" INNER

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

VALVE SPRINGS, 1.254" OUTER W/

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

VALVE SPRINGS, 1.269" HIGH PER

1.269" OD Single Springs

VALVE SPRINGS,1.460" FOR 972-

1.460" OD Dual Springs

Valve Spring Shim - 1.500" OD, .645" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shims 100 - 1.250" OD, .814" ID .015" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims 100 - 1.437" OD, .645" ID .015" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims 100 - 1.437" OD, .645" ID .030" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims 100 - 1.480" OD, .765" ID .015" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims 100 - 1.480" OD, .765" ID .060" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims 100 - 1.500" OD, .645" ID .015" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims 100 - 1.500" OD, .645" ID .030" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims 100 - 1.500" OD, .645" ID .060" Thick

• Made from the highest quality shim stock
• these shims are heat treated to stand up to radical cam lobes. Kits are also available.

Valve Stem Locks 11/32" Diameter (0.50" Low)

Edelbrock part #9615 Valve Stem Locks are 7 Degree, hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.

Valve Stem Locks Valve, 7 Degree Hardend Steel

Edelbrock part #9616 Valve Stem Locks are 7 Degree, Hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.