Performance Parts

Silver Series 2-1/8" Fuel Level Gauge

• Flat glass lens
• Small 2 ⅛" hole size
• 240 ohms empty, 33 ohms full

Silver Series 2-1/8" Volt Gauge

• Push-button calibration
• Easy to read 2 1/8" size
• Installation hardware included

Silver Series 2-1/8" Water Temperature Gauge

• Silver Series
• Stainless Low Step Bezel
• Curved Glass Lens

Single Valve Spring, 1.404 OD, 1.650 IH, .550 Lift, 300 LBS/IN - Set of 1

COMP Cams new 26903 single valve springs are a product of innovative design and superior craftsmanship.

Slip Clamp - 70mm (2.75")

• 70mm (2.75”) connection
• Easy to install and remove
• No welding or swedging required

SN74Z With 2K PPM Crossuise Output

Quality, Service and Value are not new to us.

So-Cal 2-1/8" Fuel Level Gauge

• Small 2 ⅛" hole size
• 0 ohms empty, 90 ohms full
• Flat glass lens

Socket Head Pipe Plugs in Black Finish - 1/2" NPT (Single)

Edelbrock part #9126 has a variety of pipe plugs to fill your application.

Socket Head Pipe Plugs in Black Finish - 1/4" NPT (Qty 2)

Edelbrock part #9128 has a variety of pipe plugs to fill your application.

SOLID LIFTERS, FS/FC/FF PERF S

Performance Series Solid Lifter Set for Ford 6 Cylinder

Spark Plug Wire / Boot Shrink Tubes 12mm x 1.5" Red 010821

• 3-1 Shrink Ratio
• 25 Tubes To A Package
• Available In Gray/Black/Red And Blue

Spark Plug Wire / Boot Shrink Tubes 18mm x 1.5" Red 010820

• 3-1 Shrink Ratio
• 25 Tubes To A Package
• Available In Gray/Black/Red And Blue

SPE-3995 Breather Filter

• Triple chrome-plated steel top and base
• Made with stainless steel mesh
• 10 mm flange inside diameter

SPE-42869 Breather Filter

• Triple chrome-plated steel top and base
• Includes grommet for quick installation
• Includes heat shield

SPECIAL ORDER AEM DryFlow Fltr

• Engineered to deliver enhanced horsepower & acceleration for a more exhilarating driving experience every time you hit…
• Features a performance-focused filter top that maximizes incoming airflow, helping your engine breathe deeper and run…
• Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand…

Speed-Flex Hyperfirm® Pre-Made Hose

• Pressure Tested To 4000 PSI

Speed-Flex Hyperfirm® Pre-Made Hose

• For Instrument Hoses
• Extruded PTFE
• Firmer Brake Feel

Speed-Seal Hose End

• Reliable And Reusable

Speed-Seal Hose End

• Reduces Brake Line Swell

Speed-Seal Hose End

• Reduces Brake Line Swell

Speed-Seal Hose End

• Reduces Brake Line Swell

Speed-Seal Hose End

• Reduces Brake Line Swell

SPH Bayonet Locking Dry Break

• High durability & dependability

Spread-Bore Adapter Plate (.100" thick) for Edelbrock Manifolds Only

The Edelbrock Square-Bore Adapter Plate #2731 adapts spread-bore carbs to Edelbrock manifolds without regular mounting flange.

Spring Seat Locator Kit #5799 (set of 16)

The new Edelbrock Spring Seat Locator Kit #5799 (set of 16) is intended for applications that require the use of hardened valve spring seat locators.