Performance Parts

SS4+ Brake System Rear

• CNC Machined from US Sourced Forged or Billet Aluminum
• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure

Straight 9.550" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 9.550" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Timing Chain 3110KT, 3110KT-5, 3110KT-10, 3125KT, 3121KT, 3110-5, 3110-10, 3120

Ideal for all street performance and race applications.

Trailer Axle U-Bolt; 10;000-16;000-lb. Axles; 5in. Axle Tube

• 10 in. Length
• Thread End Of 5/8 in. - 11
• Suggested Nut PN[142833]

UltraPro Hose End

• Straight, 30º, 45º, 60º, 90º, 120º, 150º, and 180º angles available

UltraPro One Way Check Valve

• Body is Anodized Aluminum

Universal Tube

• Two 6 inch straight sections with a 45 degree bend
• 4 inch outside diameter
• 0.065 inch thick 6063 aluminum alloy construction

V8 Red Steelie 5" Speedometer Gauge (140 MPH)

• V8 Red Steelie
• Stainless Low Step Bezel
• Curved Glass Lens

V8 Speedster 2-1/8" Fuel Level Gauge

• 75 ohms empty, 10 ohms full
• Small 2 ⅛" hole size
• Flat glass lens

VALVE SPRING, 1.683" DRAG RACE

Set of 16 Drag Race Springs.

Velocity Black 2-5/8" Transmission Temperature Gauge

• Temperature sending unit included
• Installation hardware included
• Full sweep provides increased accuracy

Velocity Black 4-5/8" Speedometer Gauge w/ Info Screen

• Velocity Black 4 5/8" Speedometer with information screen, 160 MPH, with a Black Low Step Bezel and a Flat Glass Lens.

Velocity White 2-5/8" Outside Air Tempature Gauge

• Installation hardware included
• Easy to read 2 5/8" size
• Pushbutton calibration

Vintage 2-5/8" Transmission Temperature Gauge

• Easy to read 2 5/8" size
• Installation hardware included

Accelerator Pump Nozzle Kit Includes: .024", .033", .043" Nozzles and Gaskets

The Edelbrock #1475 accelerator nozzle is designed for use with Edelbrock Performer Series as well as Thunder Series AVS carbs.

Float

• Genuine Holley Quality Parts

10 Degree Steel Retainer Set of 100 for 983 Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Tool Steel Retainer Set of 12for All Valves w/ 1.250" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Lightweight Titanium Retainer for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Tool Steel Retainer for All Valves w/ 1.095" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer for All Valves w/ 1.250" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer for All Valves w/ 26955, 26956 and 26957 Springs

COMP Cams Lightweight Tool Steel Retainers for #26955, #26956, #26957 springs provide the best of all valve train benefits: light weight, as well as exceptional strength and wear characteristics.

1.125" Tall Polylock for High Energy Rockers w/ 7/16" Stud

High Energyâ„¢ Aluminum Polylock with 7/16" Stud diameter.

1.550" High Lift Dual Valve Springs for Racing Applications

1.520" OD Dual Spring

PRO-SPACER

15mm Pair

• Widen Your Stance - For Better Handling.
• Made from High-Strength Aircraft-Aluminum Alloy.
• Reduced Weight Compared to Steel Wheel Spacers.