Performance Parts

Nostalgia VT 3" Speedometer Gauge (140 MPH)

• 3 3/8" Speedometer
• 140 MPH
• Flat Lens

Nostalgia VT 3" Ultimate Speedometer Gauge

• Nostalgia VT Series
• Stainless Low Step Bezel
• Curved Glass Lens

OBD-II DATA MODULE; CAN BRIDGE

• Simplifies Instrumentation Wiring And Installation
• No Sensors To Hookup; Which Means Less Wires To Connect And No Adapters To Worry About
• Fuel Level Output Of 0 Ohms Empty And 90 Ohms Full

OD Spring Locator - 1.670" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

OD Spring Locator - 1.830" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

OD Spring Locator Set of 8 - 1.780" OD, .640" ID, .060" Thickness

OD Spring Locator - 1.780" OD, .640" ID, .060" Thickness - Set of 8

Oil Cooler Port Block-Off Plate - Ford 7.3L Godzilla

• Easy Installation without the need to tap holes or fabricate special plugs and caps
• Included in Holley Accessory Drive Kits 20-320, 20-320BK, 20-340, and 20-340BK
• Simply remove and use Earl's 1138ERL or 1139ERL to add an oil cooler

Oil Pressure Sender (80 PSI)

Oil Pressure Sender 80 PSI

O-Rings

• Bi-Directional Filters
• Flows Up To 130 GPH
• Rated At 70-75 PSI

P.C.V. Grommet

• Genuine Holley Quality Parts

Performance Air Intake System

• Guaranteed to increase horsepower
• Replaces entire factory air intake system
• K& N No-Hassle Lifetime Limited Warranty

Performance Carb Base Gasket - Open Center, Bulk Packaged w/UPC Label

• 1/16" Thick
• Precision Die Cut For Excellent Seal And Fit
• Can Be Trimmed If Necessary

Performance Exhaust 12-08215 2.5" x 3.5" x 15" Polished S/S Chrome Tip - Clamp on

• High quality double wall
• 304 Stainless Steel Contruction
• Features the JBA Performance logo

Performance Exhaust 12-08216 4" x 4.5" x 12" Angle Cut Chrome Plated Exhaust Tip

• High quality double wall
• 304 Stainless Steel Contruction
• Features the JBA Performance logo

Phenolic Carb Spacer 1/2" 300-4000

• Helps isolate heat from motor to carburetor

Phenolic Carburetor Spacer - 1 Inch - 4 Hole Center

• 1" height increases plenum volume
• May increase performance in some applications
• Gaskets & installation hardware included

Phenolic Carburetor Spacer Kit - 1 Inch - 4 Hole Center

• 1" height increases plenum volume
• May increase performance in some applications
• Gasket & installation hardware included

Pie Cut Kit

• 12 Pie Cut Pieces

Polished Mounting Bracket for HP Billet Fuel Filters

• Polished billet aluminum for good looks
• Secure clamping design
• Stainless steel hardware

POST ADAPTER KIT; GROUP 31 BATTERY

• Ensure Proper Mating Surface For Testing Stud Mount Batteries
• Post Adapter Kit For Group 31 Batteries

PowerFlex Hose

• 308 Stainless Steel Braid
• PTFE Inner Liner
• Rated At 2500 psi

Power Grip Hose Clamp (O.D. 1.5"-1.75")

Edelbrock part #8460 hose clamps have a unique maintenance-free design retain tension and never needs retightening.

Power Valve Plug

Power Valve Plug - Comes with replacement gasket, sold individually.

Premium 16oz Bottle (30pack)

BOOSTane Premium is there for your peace of mind.

Premium Ford Trans Sender Adapter

• Enhanced Sealing Technology. Features advanced sealing capabilities to prevent leaks, keeping your system clean and free…
• Reliable and Accurate Performance. Delivers precise speed readings every time, ensuring your electronic speedometer…
• Easy Installation. Designed for straightforward installation, making it simple to upgrade your transmission system with…