Performance Parts

Hi-Tech 8.175" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.325" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod Set

Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod - Set of 16

Hi-Tech Oil Restricting 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

COMP Cams Hi-Techâ„¢ Oil Restricting pushrods feature 0.050" oil holes, which are half the size of standard Hi-Techâ„¢ pushrods.

Hi-Temp Shrink Tubes 9mm x 50' 010850

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

ID Spring Locator - 1.540" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

Magnum 8.700" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.900" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.150" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Moal Bomber 2-5/8" Fuel Level Gauge

• Easy to read 2 5/8" size
• 75 ohms empty,10 ohms full
• Flat glass lens

Nostalgia VT 2-1/8" Exhaust Gas Tempature Gauge

• Small 2 1/8" hole size
• Push button calibration
• Completely electric

Nostalgia VT 3-3/8" Ultimate Speedometer Gauge

Quality, Service and Value are not new to us.

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Race Extreme 1.683" OD Triple Spring; 2.100" Installed Height; 1 Spring

Elite Race Triple Valve Springs from COMP Cams have an .800" to .900" maximum lift and outside diameter of 1.680".

Race Sportsman 1.269" OD Single Spring; 1.750" Installed Height; 1 Spring

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Series 2-5/8" Temperature Gauge, Full Sweep

• Easy to read 2 5/8" size
• Push-button calibration
• Temperature sending unit included

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Set of 12 Metal Viton Valve Seals for .530" Guide Size, 5/16 Valve Stem

5/16 x .530" Metal Body Viton Valve Seal

Silver Gray 2-5/8" Cylinder Head Tempature Gauge

• Completely electric
• Easy to read 2 5/8" size
• Push button calibration

Speed-Flex Hose Size -3 Stainless Steel Braid - 10 FT

• -65° to +450° F Operating Temperature