Performance Parts

Hi-Tech 7.550" Long, .105" Wall, 5/16" Diameter Pushrod

Hi-Tech 7.700" Long, .105" Wall, 5/16" Diameter Pushrod

With a 17 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech .105 Wall pushrods feature seamless chromemoly tubing that ensures even greater strength and durability.

Hi-Tech 7.900" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.680" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.950" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 9.450" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech One-Piece 9.350" Long, .135" Wall, 3/8" Diameter Pushrod Set

Hi-Tech One-Piece 9.350" Long, .135" Wall, 3/8" Diameter Pushrod - Set of 16

Hi-Temp Shrink Tubes 24mm x 200' 010835B200

• 3 To 1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

Horseshoe clip for flxible brake hose

• Manufactured to OE specifications

Hose Separator

• 6061-T6 Aluminum
• Blue Anodized
• Fits 6 AN ProClassic Hose

Hose Separator

• 6061-T6 Aluminum
• Fits 10 AN ProClassic Hose
• Red Anodized

Hose Separator

• 6061-T6 Aluminum
• Blue Anodized
• Fits 10 AN ProClassic Hose

Hose Separator

• 6061-T6 Aluminum
• Black Anodized
• Fits 10 AN ProClassic Hose

Hose/Wire Wrap

• Easy Installation And Removal
• Lightweight
• Self-Wrapping

Hot Rod 2-1/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Small 2 ⅛" hole size
• Push-button calibration

Hot Rod 2-1/8" Air Pressure Gauge

• Small 2 1/8" hole size
• Pressure transducer included
• Pushbutton calibration

Hot Rod 2-1/8" Transmission Temperature Gauge

• Installation hardware included
• Pushbutton calibration
• Small 2 1/8" hole size

Hot Rod 2-1/8" Water Temperature Gauge

Quality, Service and Value are not new to us.

Hot Rod 2-1/8" Water Temperature Gauge

• Hot Rod Series
• Stainless Low Step Bezel
• Curved Glass Lens

Hot Rod 2-5/8" Oil Temperature Gauge

• Installation hardware included
• Easy to read 2 5/8" size
• Pushbutton calibration

Hot Rod 2-5/8" Outside Air Tempature Gauge

• Installation hardware included
• Easy to read 2 5/8" size
• Pushbutton calibration

Hot Rod 2-5/8" Short Sweep Volt Gauge

• Stainless Low Step Bezel
• Flat Glass Lens
• Features a built-in ECM filter signal switch.

Hot Rod 3-3/8" Ultimate Speedometer Gauge

Quality, Service and Value are not new to us.

Hot Rod 3" Ultimate Speedometer Gauge

• Stainless Low Step Bezel
• Flat Glass Lens
• Features a built-in ECM filter signal switch.

Hot Rod 4-5/8" Speedometer Gauge

Quality, Service and Value are not new to us.