Performance Parts

Suspension Kit, coil springs / shock absorbers; Kit (Front+Rear)

Suspension Kit, coil springs / shock absorbers

Suspension Kit, coil springs / shock absorbers; Kit (Front+Rear)

Suspension Kit, coil springs / shock absorbers

TACHOMETER MOUNT; SHOCK STRAP KIT; FOR 3 3/4in./5in. TACH (3 3/4in. SPEEDO); PRO

• Replacement Mounting Bracket
• For Use w/19264/19266/19204/19208/19201/19202/19231

PRO-ALIGNMENT Kit

Toe Link Arm

• Precision Alignment Toe Link Arm for Maximum Performance.
• Prevents Uneven Tire Wear.
• Wider Range of Camber Adjustment-Suitable for Street or Track Tuning.

Vapor Guard™ Submersible Hose

• Compatible Fuels: Race Gas, Pump Gas, Alcohol & Ethanol blended Gasoline, Biodiesel, and Diesel

Velocity Black 2-1/8" Volt Gauge

• Velocity Black 2 1/8" Volt Gauge with Black Low Step Bezel Flat Glass Lens

Zeus-Link Gauge Interface Module

• Pass-through CAN port connection for other CAN devices
• Dash light connection
• Compatible with all Classic Instruments sending units and gauges

Performance Carburetor Base Gasket

• Cellulose/Nitrile Performance Series Gasket Material
• 1/16" Thick
• Precision Die Cut For Excellent Seal And Fit

Air Filter Wrap

• This product wraps your air filter with an additional pre-filter
• Extends service interval of your K& N filter
• Water repellent treatment typically lasts 1 to 2 years

GAUGE; AIR/FUEL RATIO-NARROWBAND; 2 1/16in.; LEAN-RICH; LED ARRAY; PHANTOM

• Compatible w/Factor Narrowband O2 Sensors 0-1V
• May Require PN[2244] If Not Equipped w/Narrowband O2 Sensor
• Not For Wideband O2 Sensors 0-5V

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

SES Suspension Enhancement System

• Cushion Road Shocks
• Improve Handling
• Lifetime Warranty

10 Degree, .310", Single Groove Lock w/o Lash Cap Recess

This Steel Super Lock without a lash cap recess features a 10& deg

16-1/4" - 17-1/4" Deep Tank (0-30 Ohm)

Quality, Service and Value are not new to us.

1 Metal Body Viton Valve Seal for .530" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .575"

1 PTFE Valve Seal for .500" Guide Size, 3/8" Valve Stem

< ul>< li> Fits: 3/8" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

7 Steel Retainer for 11/32" Valves w/ 1.500"-1.550" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

All American 2-5/8" Exhaust Gas Tempature Gauge

• Completely electric
• Easy to read 2 5/8" size
• Push button calibration

All American Tradition 2-1/8" Oil Temperature Gauge

• Installation hardware included
• Small 2 1/8" hole size
• Pushbutton calibration

Autocross Gray 2-1/8" External Air Tempature Gauge

• Installation hardware included
• Pushbutton calibration
• Small 2 ⅛" hole size

Autocross Gray 2-5/8" Boost/Vacuum Gauge

• Easy to read 2 5/8" size
• Pushbutton calibration
• Pressure transducer included

Autocross Yellow 2-5/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Easy to read 2 5/8" size
• Push-button calibration

Autocross Yellow 2-5/8" Fuel Level Gauge (0-90 Ohm)

• Easy to read 2 5/8" size
• 0 ohms empty, 90 ohms full
• Flat glass lens

Axle Wheel Stud; 0.689in. Knurl; 5/8in.-18 Thread; 2-3/4in. Shoulder Length; 10

• Strong Steel Construction Ensures Durability
• Easy DIY Installation; Includes 10 Wheel Studs
• Compatible With Most Competitor Trailer Axle Hubs

Brakes 6P Front Caliper Rebuild Kit

• EDPM Rubber Pressure and Weather Seals
• Stainless Steel Brake Pad Abutment Clips
• Services 1 Caliper