Performance Parts

V8 Speedster 2-5/8" Volt Gauge

• Easy to read 2 5/8" size
• Push-button calibration
• Installation hardware included

VALVE SPRING,1.454" BEEHIVE

Beehive Shape Reduces Spring and Retainer Weight.

VALVE SPRINGS, 1.260" OVATE WI

Engine Valve Spring Kit, 1.260" Ovate WI

VALVE SPRINGS, 1.384" 2 SPRING

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

VALVE SPRINGS, 1.437" OUTER W/

1.437" OD Single Springs

VALVE SPRINGS, 1.460" OUTER W/

1.460" OD Single Springs

VALVE SPRINGS, 1.536" 2 SPRING

1.536" OD Dual Springs

Valve Spring Shim - 1.250" OD, .814" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.250" OD, .814" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.250" OD, .814" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.300" OD, .520" ID .015" Thick

Valve Spring Shim - 1.480" OD, .765" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.480" OD, .765" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.500" OD, .645" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.640" OD, .635" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shims 100 - 1.640" OD, .635" ID .015" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims 100 - 1.640" OD, .635" ID .030" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims - 100 1.640" OD, .650" ID .060" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Stem Locks 11/32" Diameter

Edelbrock part #9614 Valve Stem Locks are 7 Degree, hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.

Vapor Block(TM) Fuel Line Sleeve - 0.375" (10mm) I.D. x 24"

• Use On Fuel Lines To Prevent Vapor Lock
• Easy To Cut To Size
• 3/8in. (10mm) x 24in.

Vapor Guard™ Hose

• Carburetion Hose – Rated Maximum 50 PSI (not for use with fuel injection systems)

Vapor Guard™ Hose Clamp

• Available in 5/16" and 3/8" sizes

V-Band Clamp - 63.5mm (2.5")

• T304 stainless steel
• V-band clamp
• 63.5mm (2.5”)

Velocity Black 2-1/8" Air Fuel Ratio Gauge

• Push-button calibration
• Wideband controller included
• Small 2 ⅛" hole size

Velocity Black 2-1/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Small 2 ⅛" hole size
• Push-button calibration