Performance Parts

Boot Plate for Starshifter 80675

• Sold Individually
• Black Plastic
• Replacement Part

Bosch LSU 4.2 Wideband UEGO Installation Kit

• No calibration required when used with our gauges.
• Accurate to 0.1 AFR
• Sold as a kit

Braided Stainless Steel Fuel Hose Kit

The Edelbrock #8125 high-quality fuel line kit offers a clean and precise fuel supply line for mechanical fuel pumps with a 3/8" NPT outlet, when using an Edelbrock Single- or Dual-Feed fuel inlet kit #8128, #8131, #8133 or #8134.

Braided Stainless Throttle Cable

Can be cut to length to fit your specific application.

Brake Hose

• Firmer Pedal Feel
• Stainless Steel Hose
• Zinc Plated Hose Ends

Brake Hose

• Firmer Pedal Feel
• Stainless Steel Hose
• Zinc Plated Hose Ends

Brake Hose

• Firmer Pedal Feel
• Stainless Steel Hose
• Zinc Plated Hose Ends

Brakes 3/8-24 Inverted Flare Hard Lines for 1-1/8" Bore Master Cylinders to Proportioning Valve

• Fits 1-1/8" Remaster
• Inverted Flare Fittings
• Includes 2 Lines

Brakes Black Adjustable Proportioning Valve with Integrated Mount, Right Port Exit, with 3/8-24 Fittings

• Includes tube nuts and brass seats
• Made in the USA
• Laser etched body

Brakes ReMaster to ReMaster Prop Valve Hardlines

• Stainless Steel Construction
• Brilliant Chrome Finish
• Fits 1-1/8" Remaster

Brakes Street PBR 2-Piston Rear Disc Brake Pads for Early Baer SS/Sport And Track Front Systems - HB111/DR412

• S4, 4-Piston Replacement Pads
• Caliper hardware (2 guide pins and 2 E-clips) sold separately.
• Sold in axle sets.

Brakes Street PBR Single-Piston Rear Disc Brake Pads for Baer SS/Sport And Track Systems - HB112/DR413

• PBR Single Piston Replacement Pads
• Caliper hardware (2 guide pins and 2 E-clips) sold separately.
• Sold in axle sets.

Brake Street S4 Disc Brake Pads for Select S4 Calipers

• Replacement Pads used in certain S4, 4-piston calipers (.500 FL)
• Caliper hardware (8 pad abutments) sold separately.
• Sold in axle sets.

Bulkhead Fitting

• 6061-T6 Aluminum
• Precision Machined

Bulkhead Fitting

• 6061-T6 Aluminum
• Precision Machined

Bulkhead Fitting

• 6061-T6 Aluminum
• Precision Machined

Bulkhead Fitting

• 6061-T6 Aluminum
• Precision Machined

Bulkhead Nut

• 6061-T6 Aluminum
• Precision Machined

Bulkhead Nut

• 6061-T6 Aluminum
• Precision Machined

CAM BOLT, TOP FUEL 3/8" X 1.38

Cam Bolt, Top Fuel 3/8" X 1.380

Carburetor Accelerator Pump Assembly

The Edelbrock accelerator pump assembly part #1468 is designed for use with Edelbrock Performer Series 1412 and 1413 carbs as well as Edelbrock 1812 and 1813 Thunder Series AVS carbs.

Carburetor Base Gasket for Victor Jr. Sportsman 2V (Qty 6)

The Edelbrock Victor Jr.

Carburetor Spacer #8710 Open Center 1in Thick

The Edelbrock Carburetor Spacer #8710 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance.

Carburetor Spacer #8713 4-Hole 2in Thick

The Edelbrock Carburetor Spacer #8713 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb.

Carburetor Spacer #8720 Open Center 1in Thick

The Edelbrock Carburetor Spacer #8720 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance.