Performance Parts

Exhaust Valves for #61409 & #77409 Cylinder Heads

The Edelbrock #9363 Exhaust Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Exhaust Valves for #61459, #61559 & #61555 Cylinder Heads

The Edelbrock #9788 Exhaust Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Exhaust Valves for #77619, #77629, # 77639 & #77649 Heads

The Edelbrock #9787 Exhaust Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Extreme+ Brake System Front

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Extreme+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Extreme+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Extreme+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Fan/Shroud Electric Relay Kit

• Flexibility to configure fans as pusher or puller
• Up to 40 amp draw capacity
• Switch turns fans on at 185 degrees & off at 170 degrees

FITTING; ADAPTER; 3/8in. NPT MALE; 1/8in. NPT FEMALE; BRASS

• Constructed From Solid Brass

FITTING KIT; THERMOCOUPLE; 1/8NPT MALE W/SET SCREW/BAND CLAMP; STEEL

• Thermocouple Not Included

Flame Guard Insulation - Black - 3 Feet

• Operating Temperature -65° F to 500° F w/ Splashes to 2000° F

Flame Guard Insulation - Black - Bulk Sold By the Foot up to 50'

• Operating Temperature -65° F to 500° F w/ Splashes to 2000° F

Flame Guard Insulation - Black - Bulk Sold By the Foot up to 50'

• Operating Temperature -65° F to 500° F w/ Splashes to 2000° F

Flame Guard Insulation - Black - Bulk Sold By the Foot up to 50'

• Operating Temperature -65° F to 500° F w/ Splashes to 2000° F

Flame Guard Insulation - Orange - 10 Feet

• For Hose Assemblies
• Brick Red Color
• Sold as 10FT/3.0M pc.

Flange Gasket for 4412

Flange Gasket for 4412 - standard black gasket

Flange Kit

• Flange Includes Welded Stubs
• Primary Tube Size 1 3/4
• Square Port

Flexible In Tank Fuel Line

• 10MM ID
• 80MM Long
• Compatible for all fuel types

Float Set For Edelbrock VRS-4150 Race and Performance Series Carburetors

• Nitrophyl material for durability
• Notched for jet extenders, edges chamfered for anti-lift

Floor & Tunnel Shield II 21" x 48" 050502

• Constructed From 10 Mil Aluminum
• Just Trim Peel And Stick
• Peel and stick adhesive backing

Floor & Tunnel Shield II (Non-Adhesive) 10" x 10"

• 10 mil dimpled aluminum face
• Only 3/16" thick
• Great for exterior applications

Front Low Voltage VCU275 Harness

• Braided harness.
• Label and color-coded wires.
• Prewired communications port.

Fuel Bowl Plug Gasket

• Fits All Holley Quick Change Fuel Bowls
• 10 Pack

Fuel Cell Plumbing Kit - Oval Track

• ideal for plumbing from Hydramat to Fill Plate Inside Fuel Cell

FUEL CELL VENT KIT

• Complete kit with 6 ft of 10AN Nylon Braided hose, all fittings, rollover valve, bulkhead and breather filter