Performance Parts

SES Suspension Enhancement System

• Cushion Road Shocks
• Improve Handling
• Lifetime Warranty

SES Suspension Enhancement System

• Cushion Road Shocks
• Improve Handling
• Lifetime Warranty

Suspension Kit, coil springs / shock absorbers; Kit (Front+Rear)

Suspension Kit, coil springs / shock absorbers

Worm Gear Clamp, High-Torque, Silver, 1.57in - 2.52in (40mm - 64mm), Pack of 10

• Securely clamps pipes, couplers, and hoses with an outer diameter from 1.57- 2.52-in (40mm-64mm)
• Worm gear design for quick and easy tightening
• Stainless steel construction resists corrosion longer than zinc-plated clamps

Auto-Flex Hose - Size 8 - 6 Ft. Length

• Textile Braid In Hose Liner

BVA-36/2 TESTER W/STAND

• Digital Auto-Ranging Voltmeter
• Compatible w/6V And 12V Batteries
• Incl. ES-8 Equipment Stand And Flip Chart.

Fuel Level Sender

• 0 ohms empty, 90 ohms full
• Allow at least 1/4" clearance from end of tube to bottom of tank

LoadLifter 5000 ULTIMATE with internal jounce bumper

• Eliminates Harsh Jarring On Rough Roads
• Air Adjustable from 5 to 100 psi
• Limited Lifetime Warranty

SPE-2220 Pro-Plumb Fuel Filter

• Magna-clamp hose fittings for 3/8 inch fuel line
• White mesh filter makes dirt easy to see and maintain
• Red and blue design

WirelessOne Gen II Key FOB

• WirelessONE Key Fob

10 Degree Superlock Steel Retainer Set of 100 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

5 Gal. Polished Tank w/ Viair 444c black compressor, 1/4" & 3/8" fittings and tank mounting hardware

• 5 Gallon Polished Aluminum Tank
• Viair 444c Black Compressor
• 1/4 In And 3/8 In Tank Fittings And Tank Mounting Hardware

7 Tool Steel Retainer for 8mm Valve w/ 26925 Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

All American Nickel 2-5/8" Exhaust Gas Tempature Gauge

• Completely electric
• Push button calibration
• Easy to read 2 5/8" size

All American Tradition 2-1/8" Fuel Level Gauge

• Pushbutton calibration
• Small 2 ⅛" hole size
• Installation hardware included

All American Tradition 3-3/8" Speedometer Gauge

• 3 3/8" Diameter
• Stainless High Step Bezel
• Curved Glass Lens

Autocross Gray 2-5/8" Fuel Level Gauge (0-90 Ohm)

• Easy to read 2 5/8" size
• Flat glass lens
• 0 ohms empty, 90 ohms full

Autocross Yellow 2-5/8" Cylinder Head Tempature Gauge

• Push button calibration
• Completely electric
• Easy to read 2 5/8" size

Autocross Yellow 2-5/8" Stock Eliminator Temp Gauge

• Pushbutton calibration
• Easy to read 2 5/8" size
• Installation hardware included

Auto-Flex Hose - Size 16 - 20 Ft. Length

• Textile Braid In Hose Liner

Brakes 6S, 6R & XTR Rear Caliper Rebuild Kit

• EDPM Rubber Pressure and Weather Seals
• Crush Washers & Dust Cap
• Services 1 Caliper

Brakes Premium Aluminum 4-Lug Wheel Spacers – 4x100, 4x108, 4x114.3 Bolt Patterns

• Widen Track
• 6061-T6 Aluminum
• Sold in Pairs

Brake Street S4 Disc Brake Pads for Select S4 Calipers

• Replacement Pads used in certain S4, 4-piston calipers
• Caliper hardware (8 pad abutments) sold separately.
• Sold in axle sets.

CAM BOLTS, 5/16 X 7/8 SHCS

COMP Cams' part number 6500CB-1, Cam Bolt for 6500 Belt Drive.

Conical Seal

• Easily Installed