Performance Parts

Worm Gear Clamp, High-Torque, Gold, 0.31in-0.47 in (8mm-12mm), Pack of 10

• Securely clamps pipes, couplers, and hoses with an outer diameter from 0.31- 0.47-in (8mm-12mm)
• Worm gear design for quick and easy tightening
• Stainless steel construction resists corrosion longer than zinc-plated clamps

X-Series Wideband UEGO AFR Gauge Only (no sensor)

• Patented X-Digital wideband technology (Patent 9,575,030)
• Compatible with supply voltages up to 16V
• Auto-dimming feature

Zinc Engine Oil Additive - 4 oz.

• Treats 5-7 Quarts of Motor Oil
• Add A Bottle w/ Each Oil Change
• Made in the USA

AUTOMATED SYSTEM ANALYZER; UPGRADED; 500A

• True-Load
• V-Drop Technology
• Features Liftgate Testing

Extreme+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Extreme+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Extreme+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Protect-A-Boot and Wire Kit Blue 8 Cylinder 010732

• 25 Hi-Temp Shrink Tubes
• 8 Protect-A-Boots
• Available In 5 Colors

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

SS4 Brake System Rear

• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure
• 1-Piece Slot, Drilled, Zinc-Plate Rotor

SS4 Brake System Rear

• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure
• 1-Piece Slot, Drilled, Zinc-Plate Rotor

SS4 Brake System Rear

• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure
• 1-Piece Slot, Drilled, Zinc-Plate Rotor

Straight 10.000" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 4.00 Min. Diameter And 5.00 Max. Length

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 4.00 Min. Diameter And 9.00 Max. Length

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 4.50 Min. Diameter And 9.00 Max. Length

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 5.50 Min. Diameter And 5.50 Max. Length

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 5.50 Min. Diameter And 7.50 Max. Length

100 MICRON REPLACEMENT FILTER ELEMENT 75 SERIES

• high flow, low pressure drop, Compatible with E85 fuels, Carbureted or EFI applications

10AN Male Forged Y-Block

• Available for Any Plumbing Situation And Many Custom Applications

10 AN Straight Push-On Hose Ends - Black

• AN Sizes: -4 to -12 AN
• Finish: Black Satin Anodized
• Hose End Material: 6061 Aluminum

10 Degree Titanium Retainer Set of 4 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Degree Tool Steel Retainer Set of 12 All Valves w/ 1.437"-1.500" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10in. RV Brake Drum Hub for 3;500-lb Axle-5 on 4.5in.; 1/2in. Stud (Fully Assemb

• 1/2 in. Stud
• Stud Size 1/2 in.
• Bearing Cones