Performance Parts

4 Male to -3 Male Union Reducer - Stainless Steel

• Available for Any Plumbing Situation And Many Custom Applications.

4 Pin RGB Male/Female Connector

• Allows connection to In-line controller without need to solder wires

4 X 4in. Performance Exhaust Y-Pipe

• Superior flow & performance
• CNC precision robotic manufacturing techniques
• Durable corrosion-resistant stainless steel construction

4 X 5in. Performance Exhaust Pipe Adapter

• Mandrel bent tubing
• CNC precision robotic manufacturing techniques
• Durable corrosion-resistant stainless steel construction

4 X 9in. Oval Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

500A Dual Channel Analog Current Sensor

• Good accuracy for high and low current.
• The inner diameter is 21.55mm.
• Operating Temperature Range of -40 to 257 Fahrenheit.

50 Lb/Hr Fuel Injector (Qty 8)

The Edelbrock #15901 injectors are Bosch style, standard long length (60mm O-ring to O-ring dimension), and are high impedance 50 lb/hr at 43.5 psi (300 Kpa).

50Mm Lower Spring Seat

5/8 Cable w/ Threaded Ends for Pre-76 Vehicles Running Speedometer Control Unit

Speedometer Control Unit Adapters

5in. 90deg. Bend Performance Exhaust Pipe

• Mandrel bent tubing for smoother transitions
• CNC precision robotic manufacturing techniques
• Durable corrosion-resistant stainless steel construction

5in. Round Black Coated Exhaust Tip

• Built to the highest standards in the industry
• Constructed using the latest manufacturing technologies
• Durable corrosion-resistant stainless steel construction

5in. Round Polished Exhaust Tip

• Built to the highest standards in the industry
• Constructed using the latest manufacturing technologies
• Durable corrosion-resistant stainless steel construction

5 Male to -4 Male Union Reducer - Stainless Steel

• Available for Any Plumbing Situation And Many Custom Applications.

5 X 8in. Oval Straight-Through Performance Exhaust Muffler

• 100% Stainless Steel
• Mufflers are Bi-Directional
• Delivers a Smooth, Deep Tone

60 Lb/Hr Fuel Injector (Qty 8)

The Edelbrock #15903 is a 60 pound-per-hour Fuel Injector for the E-Street TBI, ProFlo EFI, and Edelbrock supercharger systems.

6 AN Male to 14mm x 1.50 Male

• Black Anodized

6AN Male x 3/8" SAE Quick-Disconnect Female Threaded Cap Fitting, Blue - 25 Pack

• 6061-T6 Aluminum
• Positive Seal At Maximum Operating Pressures

7 Degree Steel Retainer Set of 100 for 3/8" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

7 Degree Titanium Retainer for 26926 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Degree Titanium Retainer for 7245 Dual Conical Spring

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as strong as than most Steel ones.

7 Degree Titanium Retainer Set of 100 for 26926 Spring w/ 8mm Stem

Upgrading to these 7& deg

8AN Male to -6AN Male Forged Y-Block

• Available for Any Plumbing Situation And Many Custom Applications

8 Forged "L" B-Nut / No Ext

• Replacement Component for Kits # AT101285ERL & AT101286ERL

8mm High Energy Rc 100 ft. Spool Blue

• Color: Blue
• 100 ft. Coil
• 40-ohm Spiral Wound Ferrite coated core

8mm Spiro-Pro 30 Ft Coil Yellow

• Color: Yellow
• 30 ft. Coil
• 350-Ohm per foot resistance Spiral Wound Core