Performance Parts

Hi-Tech 210 Radius 8.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

OD Spring Locator Set of 100 - 1.670" OD, .640" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

Pro-Lite 350 Hose - Size 16 - Sold By The Foot up to 50'

• Sold per foot

Speed-Seal Hose End

• Use with Earl''s Speed Flex Smooth Bore PTFE Hose Only

SS4+ Brake System Rear

• CNC Machined from US Sourced Forged or Billet Aluminum
• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure

0.250 Fire Rated Hose - 8ft

.250 FIRE RATED HOSE-8FT

1000 Universal

• Requires Only two Measurements To Determine Kit
• Easy To Install With Fully-Illustrated Installation Manual
• 3.00 Min. Diameter And 5.50 Max. Length

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 5.50 Min. Diameter And 8.50 Max. Length

100 MICRON REPLACEMENT FILTER ELEMENT 76 SERIES

• high flow, low pressure drop
• Compatible with E85 fuels
• Carbureted or EFI applications

10 Degree Superlock Retainer Set of 100 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Titanium Retainer Set of 12 for 1.437"-1.500" OD Double Springs

Upgrading to these 10& deg

10 Degree Titanium Retainer Set of 12 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Degree Titanium Retainer Set of 4 for 1.437"-1.500" OD Double Springs

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as stong as most steel ones.

10 Degree Titanium Retainer Set of 4 for 26095 Beehive Spring

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as stong as most steel ones.

10ORB to 3/4 in Hose Barb Aluminum Fitting, Black

• Mishimoto Lifetime Warranty

10 Steel Retainer for 26120 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Steel Retainer for 983 Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer for 26955, 26956, and 26957 Springs

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and stronger than most Steel ones.

10 Tool Steel Retainer for All Valves w/ 26056 Springs

These new lightweight 1.185" spring diameter Tool Steel Retainers from COMP Cams have a 10& deg

12-1/4in. Standard Threaded Grease Brake Hub Assembly with Installed Bearing Kit

• 16000lbs Axle Capacity
• 8 On 275mm Bolt Pattern
• 17-1/2 in. Wheel Size

12 AN Port Plug O-Ring

These parts are included with your purchase of an RHS Race Block but are also available for purchase separately.

12in. Hybrid Threaded Grease Brake Hub Assembly with Installed Bearing Kit

• 8000lbs Axle Rating
• 12 in. Brake Hub Size
• 5/8 in. Stud Size

1/2in. x 25ft. Convoluted Slit Loom Tubing (Packaged)

• Protects Loose Wires Against Vibration And Damage
• Slit Lengthwise For Easy Application To Wires
• Stronger And Easier To Use Than A Braided Sleeve