Performance Parts

G/Stock Series 2-1/8" Fuel Level Gauge (240-33 Ohm)

• G-Stock
• Stainless Low Step Bezel
• Curved Glass Lens

Hardened Lash Cap w/ 5/16" Valve Stem, .230" Head Height

Includes 1 Hardened Lash Cap: 5/16 Stem Size, .230" Head Height, .080" Thickness.

Hardline Adapter

• Ideal for Use w/ Stainless Steel, Steel, and Easy Form Tubing
• Stainless Steel w/ Natural Finish
• 1 Piece Per Package

Hardware kit for BBC Cooling Manifold

• Genuine Holley Quality Parts
• Replacement Hardware kit for BBC 20-242

Hardware kit for LSA Alternator and Power Steering Accessory Drive

• Genuine Holley Quality Parts

Hardware kit for SBC Cooling Manifold

• Genuine Holley Quality Parts
• Replacement Hardware Kit for the 20-240 SBC Kit

Hardware Kit LT4 Accessory Drive Systems

• Genuine Holley Quality Parts

Heat Shrink Sleeves Black

• Color: Black
• Fits 7-9mm and 10.4mm spark plug wires
• 10 per package

Heat Shrink with Adhesive 010858

• 3 To 1 Shrink Ratio
• 19mm Inside Diameter
• 2 Feet ln Length

Heavy-Duty Shock Mount Kit; Fits 2-3/8in. Axle Tube

• Heavy-duty Shock Mount Kit
• Available Sizes 2.375 Or 3 in.
• Single Replacement Shocks Are Also Available

High Energy 206/206 Hydraulic Flat Cam for International Harvester 304-392

High Energy 206/206 Hydraulic Flat Cam for International Harvester 304-392.

High Energy 218/218 Hydraulic Flat Cam for International Harvester 304-392

High Energy 218/218 Hydraulic Flat Cam for International Harvester 304-392.

High Energy 5.429" Long, 5/16" Diameter Pushrod Set of 12

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 7.266" Long, 5/16" Diameter Pushrod

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 7.725" Long, 3/8" Diameter Pushrod

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy Polylock for 7/16" Rocker Stud

7/16" High Energy Poly Lock

High-output cannister-style ignition coil for Pro-Flo 4 and aftermarket EFI

• Oil-filled cannister design protects coil windings from vibration
• Primary resistance of 0.7 ohms for use with Pro-Flo 4 EFI
• Can be used with other aftermarket EFI

High Pressure Spring - Godzilla 7.3L Engine

• Increases oil pressure by approximately 10psi at higher RPM

Hi-Tech 11.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 210 Radius 8.600" Long, .080" Wall, 3/8" Diameter Pushrod Set

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 8.000" Long, .105" Wall, 5/16" Diameter Pushrod Set of 12

Designed to be 17% stiffer than 0.080" wall pushrods, COMP Hi-Tech .105" pushrods feature the same diameter oil holes as standard to retain full flow.

Hi-Tech 9.450" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech One-Piece 8.600" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech Rocker Stud Set w/ 7/16" Base Thread and 3/8" Rocker Thread

COMP Cams takes pride in having the finest Rocker arm Studs available on the market.

Hose Clamp

• Attach To Supporting Structure