Performance Parts

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Set of 8 Metal Viton Valve Seals for .530" Guide Size, 3/8 Valve Stem

3/8 x .530" Metal Body Viton Valve Seal

Silver Gray 2-5/8" Full Sweep Water Temperature Gauge

• Silver Gray 2 5/8" Full sweep Water Temperature gauge with standard stainless steel low step bezel and flat glass lens

Speed-Flex Extension Hose

• Pressure Tested To 4000 PSI

Speed-Flex Hyperfirm® Pre-Made Hose

• Pressure Tested To 4000 PSI

SS4+ Deep Stage Rear

• Includes 4 Calipers (1.625" Pistons)
• Powder Coated Finish
• 2-Piece Slot, Drilled, Zinc-Plated Rotor

SS4+ Deep Stage Rear

• Includes 4 Calipers (1.375" Pistons)
• Powder Coated Finish
• Billet Aluminum Hats, Drilled for 5/8" Wheel Studs

STEEL RETAINERS, 11/32" 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Straight 9.800" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

Track4 Brake System Front

• Powder Coated Finish
• Dual Seals, Dust/Weather & Pressure
• 1-Piece Slot, Drilled, Zinc-Plate Rotor

V8 Speedster 2-5/8" Full Sweep Water Temperature Gauge

• Easy to read 2 5/8" size
• Push-button calibration
• Temperature sending unit included

V8 Speedster 3-3/8" Speedometer Gauge

V8 Speedster 3 3/8" Speedometer 140 MPH with Stainless High Step Bezel Curved Glass Lens

Valve Spring Shim - 1.000" OD, .688" ID .060" Thickness

White 2-1/8" Outside Air Tempature Gauge

• Small 2 1/8" hole size
• Installation hardware included
• Pushbutton calibration

White 2-5/8" Fuel Level Gauge

• 0 ohms empty, 90 ohms full
• Flat glass lens
• Easy to read 2 5/8" size

Universal Clamp-On Air Filter

• High air flow with excellent filtration
• Malleable flanges
• One year limited warranty

02 Bung Only

Patriot Exhaust H7231 Universal weld-on 18mm oxygen sensor fitting

0.50in. 90deg. Bend (10 Pack) Barbed Performance Exhaust Hangers

• Pack of 10
• Barbed design
• High-strength support

1000 REPLACEMENT BAG

• Air Fitting Molded In
• High Burst Strength
• Limited Lifetime Warranty

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 3.50 Min. Diameter And 5.26 Max. Length

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 4.50 Min. Diameter And 6.5 Length

1000 Universal

• Limited Lifetime Warranty
• Tough Molded Polyurethane
• 5.00 Min. Diameter And 11.00 Max. Length