Performance Parts

ID Spring Locator Set of 16 - 1.565" OD, .535" ID, .100" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 4 - 1.500" OD, .570" ID, .060" Thickness

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

Inner Bearing Cone; 12;000-16;000-lb. Axles; 4 Pack

• Compatible With 12000 To 16000 lbs Axles
• Pairs With Bearing Race No.3920
• Compatible With Most Competitor Trailer Axle Hubs

Inner Bearing Race; 12;000-16;000-lb. Axles; 6 Pack

• Compatible With 12000 To 16000 lbs Axles
• Pairs With Bearing No.3984
• Easy DIY Installation; Includes Six Inner Races

Intake Valve for #60069 & 60079 Cylinder Heads

The Edelbrock #9754 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #60399 Cylinder Heads

The Edelbrock #9778 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #60809 & #60819 Cylinder Heads

The Edelbrock #93780 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60399 Cylinder Heads

The Edelbrock #9777 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #61409 & #77409 Cylinder Heads

The Edelbrock #9360 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel Valves with undercut stems for increased flow.

LIFTER GUIDE, CS 87-UP

Lifter Guide for Chevrolet V6, Small Block, Non-Vortec 305/350, Vortec, LT1

LIFTER GUIDE SET, CS 87-UP

Lifter Guide Set of 8 for Chevrolet V6, Small Block, Non-Vortec 305/350, Vortec, LT1

Line Clamp

• Fits 1/2 in. Tubing
• Lightweight Aluminum
• Red Anodized

LOADLIFTER 5000; LEAF SPRING LEVELING KIT

• Up To 5000 Lbs Of Load Leveling Capacity
• Eliminates Squat; Trailer Sway; Rough Ride; And Bottoming Out
• Fits 1986-1994 Toyota Motorhome Micro Mini

LoadLifter 5000 ULTIMATE replacement air spring

• Not A Full Kit
• One Air Spring
• Hardware Included

Low-Profile Barrel Band Clamp - 3"

• Stainless steel construction
• 3” (76mm) connection
• Easy to install and remove

Lt1 Boot/Terminal Kit 90 Degree/180 Degree

• All boot/terminals fit 8-10.4mm
• Pack of 10

M22x1.5 to -12AN Aluminum Fitting, Black

• Provides connection point for remote oil filter housing to engine oil supply, oil coolers, or sensors
• Precise CNC-machined 6061 aluminum fitting
• Features a robust Dowty seal connection for leak-free operation

M22x1.5 to 1/8" NPT Aluminum Fitting, Black

• Provides connection point for remote oil filter housing to engine oil supply, oil coolers, or sensors
• Precise CNC-machined 6061 aluminum fitting
• Features a robust Dowty seal connection for leak-free operation

M22x1.5 to -8AN Aluminum Fitting, Black

• Provides connection point for remote oil filter housing to engine oil supply, oil coolers, or sensors
• Precise CNC-machined 6061 aluminum fitting
• Features a robust Dowty seal connection for leak-free operation

Magnetic Signal Stabilizer

The stabilizer converts the signal from a magnetic pickup to a square wave trigger signal for the MSD Ignition control.

Magnet Sleeve (only) for 1123 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1123 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1381A Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1381A (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1382 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1382 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1383 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1383 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 1442 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1442 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.