Performance Parts

ProClassic Stainless Hose

• For use with Fuel, Water, and Oils
• For use with Russell ProClassic Hose Ends
• Stainless Steel Covering

ProClassic Stainless Hose

• For use with Fuel, Water, and Oils
• For use with Russell ProClassic Hose Ends
• Stainless Steel Covering

PROFESSIONAL FAST CHARGER/TESTER

• Fully Automated And Menu Driven
• There Is No Learning Curve To Safely Operate The XTC-360
• Full Color Back Lit Capacitive Touch Screen For Easy Operation

Pro-Flo EFI Air Temperature Sensor 3/8"-18 NPT Thread

The Edelbrock #3588 Air Temp Sensor with 3/8"-18 NPT threads.

Pro-Lite 350 Hose - Size 10 - 33 Ft. Length

• Incredible Flexibility

Pro-Lite 350 Hose - Size 12 - 33 Ft. Length

• Synthetic Rubber Liner
• Constructed In USA
• Incredible Flexibility

Pro-Lite 350 Hose - Size 16 - 33 Ft. Length

• Synthetic Rubber Liner

Pro-Lite 390 Hose - Size 8 - 33 Ft. Length

Introducing Pro-Lite 390™ from Earl's!

Proportioning valve left side mounting bracket (Zinc)

• Easy bolt on installation to master cylinder mounting studs

Pro Repair Kit 135 Degree Resistor Black

• Color: Black
• 135° repair wire kits have terminal and boot on OE end only
• HEI and socket style distributor ends provided in kits

Pro Repair Kit 90 Degree/180 Degree TCW Blue

• Color: Blue
• Taylor repair wire kits provide easy replacement for damaged wire
• HEI and socket style distributor ends provided in kits

Protect-A-Boot 6" Blue 8-Pack 010532

• Universal-Fits Most Straight Or Angled Boots
• Installs In Seconds
• 8 Boots Per Pack

Protect-A-Wire Spools Black 8mm Bulk 010611B

• Constructed From High Temp Resistant Glass Fiber Material
• Withstands 500 Degrees F Continuous 1200 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Cable/Hoses

Protect-A-Wire Spools Silver 8mm x 50' 010601B50

• Constructed From High Temp Resistant Glass Fiber Material
• Protects Electrical Wiring/Speedometer/Cable/Hoses
• Bulk Spool Is Great To Have On Hand For Any Project

ProXS Muffler 2.25in Offset Inlet/ 2.25in Center Outlet 4in x 9.5in Oval x 14in Long Body

• Universal muffler. Reversible design.
• Alternate muffler with Notched necks is 400483. Use 1" wide band clamps 18322.
• Alternate muffler with Notched necks is 400483. Use 1" wide band clamps 18322.

ProXS Muffler 2.25in Offset Inlet/ 2.25in Center Outlet 4in x 9.5in Oval x 19in Long Body Notched Necks

• Universal muffler. Reversible design.
• 2.25" Offset Inlet/ 2.25" Center Outlet, 4" x 9.5" Oval, 19" Long Body, 24" Overall Length
• Notched necks are designed for clamp in installation. Use 1" wide band clamps 18322.

ProXS Muffler 2in Center Inlet/ 2in Center Outlet 4in x 9.5inOval x 14in Long Oval Body Notched Necks

• Universal muffler. Reversible design.
• 2" Center Inlet/ 2" Center Outlet, 4" x 9.5" Oval, 14" Long Body, 19" Overall Length
• Notched necks are designed for clamp in installation. Use 1" wide band clamps 18302.

ProXS Muffler 2in Offset Inlet/ 2in Center Outlet 4in x 9.5in Oval x 14in Long Body

• Universal muffler. Reversible design.
• 2" Offset Inlet/ 2" Center Outlet, 4" x 9.5" Oval, 14" Long Body, 19" Overall Length
• Notched necks are designed for clamp in installation. Use 1" wide band clamps 18302.

ProXS Muffler 2in Offset Inlet/ 2in Center Outlet 4in x 9.5in Oval x 14in Long Body Notched Necks

• Universal muffler. Reversible design.
• Notched necks are designed for clamp in installation. Use 1" wide band clamps 18302.
• Alternate muffler with Un-Notched necks is 40346. If clamping, use 3" wide band clamps.

PTFE Braided Line Replacement Ferrule, 5 Pack

• Replacement ferrule pack for assembling or repairing Mishimoto PTFE Braided Line Fittings
• Provides optimal compression seal for leak-free fitting installation
• 6061 aluminum construction precision machined to exact tolerances

Pulley for Power Steering Pump

• Prevents Damage to Steering Box on Older Vehicles (Due to Excessive Pressure)
• Use w/ Power Steering Pump 198-104
• Ideal for Gen III Hemi Engine Swaps in Muscle Cars & Trucks

PULLEY SMALL P/S PUMP (USE W/UNDERDRIVE BALANCER)

• Works with standard 1997 and up Corvette power steering pump (Saginaw TC type)
• Must be used with a 25% under drive balancer to prevent over RPM of the P/S pump
• Black OE coating and design

Pump Discharge Checks (needles)

Pump Discharge Checks - (needles) found underneath the accelerator pump discharge nozzle and screw.

Push-Lock Fitting, -10AN, 90-Degree

• -10AN push lock port for simple installation
• Offered in straight, 45-degree, 90-degree, 120-degree, and 180-degree angles to allow for easy routing of lines
• Precision machining provides a leak-free connection with -10AN line

Push-Lock Fitting, -10AN, Straight

• -10AN push lock port for simple installation
• Offered in straight, 45-degree, 90-degree, 120-degree, and 180-degree angles to allow for easy routing of lines
• Precision machining provides a leak-free connection with -10AN line