Performance Parts

V8 Red Steelie 2-1/8" Air Fuel Ratio Gauge

• Full sweep provides increased accuracy
• Small 2 ⅛" hole size
• Push-button calibration

V8 Red Steelie 2-1/8" Outside Air Tempature Gauge

• Push-button calibration
• Small 2 ⅛" hole size
• Installation hardware included

V8 Red Steelie 2-1/8" Transmission Temperature Gauge

• Small 2 1/8" hole size
• Pushbutton calibration
• Installation hardware included

V8 Red Steelie 2-1/8" Transmission Temperature Gauge

• Installation hardware included

V8 Red Steelie 2-5/8" Exhaust Gas Tempature Gauge

• Easy to read 2 5/8" size
• Push button calibration
• Completely electric

V8 Red Steelie 2-5/8" Outside Air Temp Gauge

• Easy to read 2 5/8" size
• Pushbutton calibration
• Installation hardware included

V8 Red Steelie 5" Speedtachular Speedometer Gauge

• V8 Red Steelie
• Stainless Low Step Bezel
• Flat Glass Lens

V8 Speedster 2-1/8" Exhaust Gas Tempature Gauge

• Push button calibration
• Small 2 1/8" hole size
• Completely electric

V8 Speedster 2-5/8" Air Pressure Gauge

• Easy to read 2 5/8" size
• Pressure transducer included
• Pushbutton calibration

V8 Speedster 2-5/8" Cylinder Head Tempature Gauge

• Push button calibration
• Easy to read 2 5/8" size
• Completely electric

VALVE SPRING, 1.638" H-11 ASSE

1.638" OD Dual Springs

VALVE SPRINGS, 1.254" OUTER W/

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Valve Spring Shim - 1.000" OD, .688" ID .060" Thickness

Valve Spring Shim - 1.437" OD, .645" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.437" OD, .645" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.437" OD, .645" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.500" OD, .645" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim - 1.640" OD, .635" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.640" outside diameter and .635" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shims 100 - 1.437" OD, .645" ID .060" Thickness

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shims 100 - 1.480" OD, .765" ID .030" Thick

COMP Cams' Valve Spring Shims are manufactured from the highest quality shim stock available.

Valve Spring Shim Set of 8 - 1.300" OD, .520" ID .015" Thickness

Valve Stem Locks 3/8" Diameter

Edelbrock part #9612 Valve Stem Locks are 7 Degree, hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.

Vapor Block(TM) Fuel Line Sleeve - 0.5" (13mm) I.D. x 12"

• Use On Fuel Lines To Prevent Vapor Lock
• Easy To Cut To Size
• 1/2in. (13mm) x 12in.

Vapor Guard™ Hose

• Carburetion Hose – Rated Maximum 50 PSI (not for use with fuel injection systems)

VCU 275 - Plug & Pin Kit

• Waterproof connectors
• Quick-connect connectors
• Weatherproof seals to keep contaminants out