Performance Parts

DRAG LINK TETHER BLACK

• Nylon webbsing with adjuster

Dual Channel Multifunction Remote

• Designed to control multiple LED accessories

Dual Pass/Single Row Universal Heat Exchanger (20"W/8"H/2"D) 20,500 BTU

Edelbrock heat exchanger part #15549 is a dual pass/single row design and delivers 20,500 btu/hr Includes a 3/4in. barbed inlet and outlet for plumbing, along with M6x1.0 threaded bungs for mounting and includes brackets.

EV Combined Charging Unit (CCU)

• Plug-and-play with AEM's EV controls
• Input over and under voltage protection
• Over temperature protection

Exhaust Back Pressure Plumbing Kit

• Premade -4AN Speed-Flex Hose - 24” Long
• Cushion Clamp & Mounting Hardware - to Mount Sensor
• Use w/ Sensor 554-102 (available separately)

Extreme+ Brake System Front

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Fuel Injectors, 60 Lb/Hr Short Body (Sold Individually)

3696 is sold individually, Short Body Siemens High Impedance (12.5 ohms) Fuel Injector with a flow rate of 60 lb/hr (630cc) @43.5psi.

Gasket, Distributor Cap (Thick) for PerTronix Industrial Electronic Distributor

• Distributor Cap (Thick) for PerTronix Industrial Electronic Distributor
• Replacement Part (only) for PerTronix Industrial Electronic Distributors

GAUGE COVER; FOR 5in. PEDESTAL TACHOMETER; CARBON FIBER CUP

• Pedestal Mount

GAUGE; EXHAUST PRESS; 2 1/16in.; 100PSI; DIGITAL STEPPER MOTOR; ULTRA-LITE

• 12 And 16V Compatible
• Incl. Mounting Hardware/Instructions
• Recommended Particle Trap Kit PN[5375]

GAUGE; NITROUS PRESS; 2 1/16in.; 1600PSI; STEPPER MOTOR W/PK/WRN; BLK/CHRM; SPEK

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

GAUGE; NITROUS PRESS; 2 1/16in.; 1600PSI; STEPPER MOTOR W/PK/WRN; WHT/BLK; SPEK

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

GAUGE; NITROUS PRESSURE; 2 1/16in.; 1600PSI; DIGITAL STEPPER MOTOR; ULTRA-LITE I

• Modern LED Through-The-Dial Lighting
• 12 And 16V Compatible
• Incl. Wiring Harness

Hi-Tech Polylock Set for 1/2" Stud Ultra Pro Magnum Rockers

Hi-Tech Polylocks/Adjusting Nuts, 1/2" Stud for Ultra Pro Magnum/Ultra Pro Magnum XD Rockers - Set of 16

HM Grade Federal / EPA Compliant Universal Catalytic Converter

• Durable 308 stainless steel MIG welds
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

HVAC Filter; 20 x 30 x 1, MERV 8

• Merv 8 rating
• Easy to clean and reuse
• Lifetime limited warranty

In-Line Electric Fuel Pump for EFI rated at 80 GPH @ 45 PSI

Edelbrock part #1790 is a 80GPH In-Line Electric fuel pump featuring a black anodized aluminum housing and high-quality internals, resulting in both a strong and durable design.

Magnet Sleeve (only) for 1145A Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1145A (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Onyx Series Turbo Shield/Blanket GEN-3 T4 Shield

• Silicone coated Onyx Black outer shell.
• Silica inner insulation layer.
• Barrier layer of fine stainless mesh.

End Link Kit

Pair of Adjustable End Links

• Chromoly Rod Ends and Easy to Adjust Hex Bodies
• Sold as a pair
• Made in the U.S.A.

Performance Air Intake System

• Replaces factory air filter and intake tube
• No-Hassle Lifetime Limited Warranty™
• Will not void vehicle warranty

Performance Carb Base Gasket - Open Center,Bulk Packaged w/ UPC Label

• 1/16" Thick
• Precision Die Cut For Excellent Seal And Fit
• Can Be Trimmed If Necessary

Performance Exhaust 6680W Oxygen Sensor Extension Wires

• 36 Inch length
• Round Plug
• 05-10 Ford Vehicles

Power Steering Hose End

• Stainless Steel (or Nickel Plated, or Black Chromate Finish – depending on the part number)

Power Steering Hose End

• Stainless Steel (or Nickel Plated, or Black Chromate Finish – depending on the part number)