Performance Parts

LS Airforce Intake Fastener Kit For Pn 2701 And Pn 2702

This is a replacement fastener kit for your PN 2701-2702 AirForce Manifold.

LS/LT High-Mount Accessory Drive Bracket - A/C, P/S & Alt Brackets

• The most cost effective LS bracket solution on the market!
• A/C bracket accepts GM R4 compressor (Sanden version now available)
• Ideal for crate engines, take out motors and engine builders!

M 9100 (Bump Stop) - Suspension Bump Stop

• Filled with technology perfected over 3 decades of off-road dominance
• Monotube gas pressure design maximizes heat dissipation
• Available for lifted truck, custom truck, rock crawling and off-road racing applications

Machined Steel 7 Degree, 5/16", Single Groove Race Lock

Includes 1 Pair of Machined Steel Race Locks: 1 Groove, 7& deg

Machined Steel 7 Degree, 5mm, Single Groove Race Lock

Machined Steel 7& deg

Machined Steel Set of 100 - 7 Degree, 3/8", Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Magnetic Proximity Sensor

The Magnetic Proximity Sensor will respond to pulse signals across a 1/16" air-gap between the sensor tip and disk-rotor, IRS-CV joint bolt-heads or notched brake-drum edge.;<br clear="none" xmlns="" /><br clear="none" xmlns="" />It is useful on trans-axle setups or transmissions without mechanical speedometer cable connection.;<br clear="none" xmlns="" /><br clear="none" xmlns="" />Using a stock GM Speed Sensor - 700R, 4L60, etc.

Magnet Sleeve (only) for 1247 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 1247 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for 2842 Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix 2842 (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for LU-147A Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix LU-147A (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (only) for MR-1122A Ignitor Kit

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• Replacement Magnet Sleeve for PerTronix MR-1122A (Service Part Only)
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.

Magnet Sleeve (replacement) for FLAME-THROWER 4 cylinder Billet Distributor

• Replacement Part (only) for PerTronix Flame Thrower Distributors

Magnum 7.150" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.15" Long, .08" Wall, 5/16" Diameter Pushrod Set 12

The Magnum 5/16" and 3/8" pushrods offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.400" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.450" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.600" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.700" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Polylock for 3/8" Rocker Stud

3/8" Magnum Poly Lock

Magnum Polylock for 7/16" Rocker Stud

7/16" Magnum Poly Lock-1

Manifold Absolute Pressure Sensor #3547 Upgrade For ProFlo4 Boosted Applications

Edelbrock part #3547 T-MAP Sensor Conversion Harness Kit is to install a single combination Inlet Air Temp (IAT) & Manifold Absolute Pressure (MAP) sensor in place of existing separate IAT and MAP sensors.

Marine 32oz Case (6pack)

BOOSTane?s Marine formula is the team getting back to its roots.

Marine Flame Arrestor

• Marine approved per SAE J1928 standard
• Smoothes and straightens incoming air
• Washable and reusable

Max-Cool Transmission Cooler Kit for Dodge 8HP70 2015 & up Challengers/Chargers

The TCI® Max-Cool Transmission Cooler Kit addresses overheating issues sometimes seen in the 8HP70 eight-speed automatic transmission installed in 2015 and newer Challengers and Chargers.

Max-Fire Ignition HEI Coil-In-Cap in Black Finish

Edelbrock part #22743 HEI Coil-In-Cap, design is for use with GM HEI coil in-cap distributors with red and yellow primary wires.