Performance Parts

Hi-Tech One-Piece 7.900" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech One-Piece 8.300" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 8.300" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech One-Piece 8.650" Long, .135" Wall, 3/8" Diameter Pushrod Set

37% stiffer than standard .080" wall pushrods.

Hi-Tech One-Piece 9.150" Long, .135" Wall, 3/8" Diameter Pushrod

Hi-Tech One-Piece 9.150" Long, .135" Wall, 3/8" Diameter Pushrod - Single

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 3/8" Rocker Thread

3/8 HI-Tech Stud

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 7/16" Rocker Thread

7/16 HI-Tech Stud

Hi-Temp Shrink Tubes 18mm x 48" 010834

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

Hi-Temp Shrink Tubes 24mm x 48" 010835

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

Hi-Temp Shrink Tubes 2" (50mm) x 24" 010856

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

Hi-Temp Shrink Tubes 6mm x 200' 010838B200

• 3 To 1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

Hi-Temp Shrink Tubes 6mm x 48" 010838

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

Hose Separator

• 6061-T6 Aluminum
• Blue Anodized
• Fits 8 AN ProClassic Hose

Hose Separator

• 6061-T6 Aluminum
• Fits 12 AN ProClassic Hose
• Red Anodized

Hose & Tubing Separator

• For Professional Engine Look

Hose/Wire Wrap

• Easy Installation And Removal
• Lightweight
• Self-Wrapping

Hot Rod 2-1/8" Brake Pressure Gauge

• Small 2 1/8" hole size
• Completely electric
• Pushbutton calibration

Hot Rod 2-1/8" Exhaust Gas Tempature Gauge

• Push button calibration
• Completely electric
• Small 2 1/8" hole size

Hot Rod 4-5/8" Speedometer Gauge with Information Screen

• Flat Glass Lens
• Resettable trip odometer
• Display Options:

Hot Rod Series 2-5/8" Brake Pressure Gauge - Full Sweep

Quality, Service and Value are not new to us.

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HVAC Filter; 10 x 20 x 1, MERV 8

• Merv 8 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC Filter; 12 x 24 x 1, MERV 13

• Merv 13 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC Filter; 14 x 14 x 1, MERV 8

• Merv 8 rating
• Easy to clean and reuse
• Lifetime limited warranty

HVAC Filter; 14 x 18 x 1, MERV 11

• Lifetime limited warranty
• Merv 11 rating
• Easy to clean and reuse

HVAC Filter; 16 x 16 x 1, MERV 13

• Merv 13 rating
• Easy to clean and reuse
• Lifetime limited warranty