Performance Parts

Valve Spring Shim - 1.480" OD, .765" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Vapor Block(TM) Fuel Line Sleeve - 0.375" (10mm) I.D. x 12"

• Use On Fuel Lines To Prevent Vapor Lock
• Easy To Cut To Size
• 3/8in. (10mm) x 12in.

Vapor Guard™ Adapter

• Black Anodized Finish

Vapor Guard™ Adapter

• Black Anodized Finish

Vapor Guard™ Hose

• Carburetion Hose – Rated Maximum 50 PSI (not for use with fuel injection systems)

VCU275 Programmable Electric Vehicle Control Unit

• Full Integration of all EV sub-systems under one controller
• Accessory control of cooling pumps, cooling fans, lights and more
• Supports up to 2 Drive Motors and up to 1200V AEM BMS18 Systems

Velocity Black 2-1/8" Cylinder Head Tempature Gauge

• Push button calibration
• Small 2 1/8" hole size
• Completely electric

Velocity Black 2-5/8" Brake Pressure Gauge

• Pushbutton calibration
• Easy to read 2 5/8" size
• Completely electric

Velocity Black 2-5/8" Cylinder Head Tempature Gauge

• Push button calibration
• Completely electric
• Easy to read 2 5/8" size

Velocity Black 2-5/8" Cylinder Head Tempature Gauge

• Completely electric
• Push button calibration
• Easy to read 2 5/8" size

Velocity Black 2-5/8" Exhaust Gas Tempature Gauge

• Push button calibration
• Easy to read 2 5/8" size
• Completely electric

Velocity Black 2-5/8" Fuel Level Gauge (0-30 Ohm)

• Flat glass lens
• Easy to read 2 5/8" size
• 0 ohms empty, 30 ohms full

Velocity Black 2-5/8" Transmission Temperature Gauge

• Easy to read 2 5/8" size
• Installation hardware included

Velocity White 2-1/8" Brake Pressure Gauge

• Completely electric
• Small 2 1/8" hole size
• Pushbutton calibration

Velocity White 2-1/8" Exhaust Gas Tempature Gauge

• Completely electric
• Push button calibration
• Small 2 1/8" hole size

Velocity White 2-1/8" Fuel Level Gauge Program American

• Small 2 ⅛" hole size
• Installation hardware included
• Push-button calibration

Velocity White 2-5/8" Exhaust Gas Tempature Gauge

• Easy to read 2 5/8" size
• Completely electric
• Push button calibration

Velocity White 2-5/8" Full Sweep Water Temp Gauge

• Easy to read 2 5/8" size
• Push-button calibration
• Temperature sending unit included

Velocity White 2-5/8" Transmission Temperature Gauge

• Pushbutton calibration
• Installation hardware included
• Easy to read 2 5/8" size

Water Bypass Kit

Edelbrock part #8095 Water Bypass Kit provides (2) bypass hoses, fittings and water neck adapter to plumb from the cylinder heads to the water neck.

Water Temperature Sensor Adapter, Black, 38mm

• Made of solid aluminum
• 1/8-in NPT sensor bung
• Allows placement of sensor directly in path of coolant for accurate readings

White 2-5/8" Air Pressure Gauge

• Pushbutton calibration
• Pressure transducer included
• Easy to read 2 5/8" size

White 2-5/8" Outside Air Temp Gauge

• Installation hardware included
• Pushbutton calibration
• Easy to read 2 5/8" size

White Hot 2-1/8" Exhaust Gas Tempature Gauge

• Push button calibration
• Small 2 1/8" hole size
• Completely electric

WIRE HARNESS; MAP/BOOST; DIGITAL STEPPER MOTOR; REPLACEMENT

• MAP Sensor
• 8 feat. Pre-Terminated Plug And Play