Performance Parts

High Energy 7.725" Long, 3/8" Diameter Pushrod

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy Polylock for 7/16" Rocker Stud

7/16" High Energy Poly Lock

High-output cannister-style ignition coil for Pro-Flo 4 and aftermarket EFI

• Oil-filled cannister design protects coil windings from vibration
• Primary resistance of 0.7 ohms for use with Pro-Flo 4 EFI
• Can be used with other aftermarket EFI

High Pressure Spring - Godzilla 7.3L Engine

• Increases oil pressure by approximately 10psi at higher RPM

Hi-Tech 11.100" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 210 Radius 8.600" Long, .080" Wall, 3/8" Diameter Pushrod Set

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 8.000" Long, .105" Wall, 5/16" Diameter Pushrod Set of 12

Designed to be 17% stiffer than 0.080" wall pushrods, COMP Hi-Tech .105" pushrods feature the same diameter oil holes as standard to retain full flow.

Hi-Tech 9.450" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech One-Piece 8.600" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hi-Tech Rocker Stud Set w/ 7/16" Base Thread and 3/8" Rocker Thread

COMP Cams takes pride in having the finest Rocker arm Studs available on the market.

Hose Clamp

• Attach To Supporting Structure

Hose & Tubing Separator

• For Professional Engine Look

Hot Rod 2-1/8" Gear Select W/OD

• Hot Rod
• With Overdrive
• Curved Glass Lens

Hot Rod 2-1/8" Transmission Temperature Gauge

• Installation hardware included

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

HYDRAMAT (3X15) RECT - 19MM OUTLET OFFSET

• Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
• Can be folded and compressed for easy installation through a variety of fuel cell openings

Hydraulic Release Bearing Kit

• Compatible With Dot 3 And Dot 4 Brake Fluids
• Utilizes OEM (Original Equipment) Connection Point For Easy Installation
• Commonly Used For Transmission Swap Projects

ID Spring Locator - 1.285" OD, .532" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .525" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .135" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .135" Thickness - Single

ID Spring Locator Set of 16 - 1.350" OD, .515" ID, .050" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

INDICATOR LIGHT; PIT ROAD SPEED; PEDESTAL; BLACK; PROGRAMMABLE

• Single Precise User Configure Set Point
• Quick Reacting LED Light
• Four Configurable Speed Brands

Intake Valves for #60979 Cylinder Heads

The Edelbrock #9779 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Jet Assortment Kit

Jet Assortment Kit with billet plate.