Performance Parts

Endure-X Solid Roller Lifter w/ .904" Diameter, Right Pushrod Seat, .300" Taller

.300" Tall Roller lifter with out oil hole, .210" right offset Pushrod seat, cutaway body with oil band, single lifter

Engine Valve Spring

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Engine Valve Spring

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

Engine Valve Spring

Dual Valve Springs from COMP Cams are manufactured from H11 material and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter the application.

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from H11 material and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter the application.

Exhaust Tip

• Weld-on
• Angle Cut Rolled Edge
• 304S Stainless Steel Inner Core

Exhaust Valve for #61459, #61559 & #61555 Cylinder Heads

The Edelbrock #9789 Exhaust Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Exhaust Valves for #60519 Cylinder Heads

The Edelbrock #9318 Exhaust Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Extreme+ Brake System Front

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

FITTING; ADAPTER; 1/2in. NPT MALE; BRASS; FOR AUTO GAGE MECH. TEMP.

• Brass NPT Temperature Adapter
• 5/8-18 UNF Female Thread; 45 Deg.
• Tapered Seat to 1/2-1/16 in. NPT Male

FITTING; ADAPTER; 90deg.; 1/8in. NPTF FEMALE TO-3AN MALE; BRASS

• .-3AN Male To 1/8 In. NPT Female
• 90 Degree Fitting
• Manufactured From High Quality Brass

Fitting Kit - For booster, master, proportioning valve combo kit

• Manufactured to OE specifications

Front Drive Distributor Belt

9 mm replacement belt that fits MSD front drive distributors.

Front Low Voltage VCU300 Harness

• Braided harness.
• Label with color coded wires.
• Prewired communications port.

Fuel Bowl Screws (Med)[1 7/8"]-Gold & Gaskets 5-4

• Plated to resist corrosion

Fuel Filter Replacement Element

• Includes O-rings

Fuel Hose Kit with Street Fuel Filter

Edelbrock part #8102 ProClassic Fuel Hose with Street Fuel Filter offers a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT to the 5/8" -20 fuel inlet on Edelbrock Performer and Thunder Series AVS Carbs.

Fuel Level Sender

• Allow at least 1/4" clearance from end of tube to bottom of tank
• 0 ohms empty, 30 ohms full

Fuel Sight Plug Gaskets

Fuel Sight Plug Gaskets - sold in pairs

Fuel Supply System

• Incl. Edelbrock Fuel Pressure Regulator PN" "1727" "
• Includes Edelbrock Electric Fuel Pump PN" "1792" "

Gateway Bypass Harness

• bypasses factory gateway module
• instals behind dash
• connects to STAR connectors

Gator Brand 50-70mm Hose Clamp

Gator Brand Clamps are produced using a stainless Steel continuous band with extruded, asymmetrical threads for reliable performance.

Gator Brand 60-80mm Hose Clamp

Gator Brand Clamps are produced using a stainless Steel continuous band with extruded, asymmetrical threads for reliable performance.

Gator Brand 80-100mm Hose Clamp

Gator Brand Clamps are produced using a stainless Steel continuous band with extruded, asymmetrical threads for reliable performance.