Performance Parts

High Energy 9.252" Long, 3/8" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hi-Tech 210 Radius 8.550" Long, .080" Wall, 3/8" Diameter Pushrod

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech 8.175" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 8.325" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod Set

Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod - Set of 16

Hi-Tech Oil Restricting 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

COMP Cams Hi-Techâ„¢ Oil Restricting pushrods feature 0.050" oil holes, which are half the size of standard Hi-Techâ„¢ pushrods.

Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

HRT Blower

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

ID Spring Locator - 1.285" OD, .805" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .040" Thickness - Single

Late Model USCAR Fuel Pump Module Mounting Ring - Steel

• Available in 6061 Aluminum, Mild Steel, and 304 Stainless Steel – Choose Same Material as Fuel Tank for Easy Welding

Magnum 8.900" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.150" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Moal Bomber 2-5/8" Fuel Level Gauge

• Easy to read 2 5/8" size
• 75 ohms empty,10 ohms full
• Flat glass lens

Nostalgia VT 3-3/8" Ultimate Speedometer Gauge

Quality, Service and Value are not new to us.

PIC PROGRAMMER FOR ELITE PIT ROAD SPEED TACHS

• Expanded Viewable Area
• Advanced Circuit Design
• Brite White Always On Dial

Pro Brake System Front

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Pro+ Brake System Rear

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Race Extreme 1.683" OD Triple Spring; 2.100" Installed Height; 1 Spring

Elite Race Triple Valve Springs from COMP Cams have an .800" to .900" maximum lift and outside diameter of 1.680".

ROLLER LIFTER, CSV-6

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Service Parts Replacement Rotors

• Purpose built castings manufactured from premium materials
• Curved vane design for optimum cooling
• Dynamic balanced for vibration free performance

Set of 12 Metal Viton Valve Seals for .530" Guide Size, 5/16 Valve Stem

5/16 x .530" Metal Body Viton Valve Seal

Silver Gray 2-5/8" Cylinder Head Tempature Gauge

• Completely electric
• Easy to read 2 5/8" size
• Push button calibration