Performance Parts

Hump Hose Coupler, Black, Silicone, 2.75in

• 100-percent silicone construction
• Heat-resistant embedded fibers
• High heat and pressure tolerances

HYDRAMAT (3X8) 19MM Offset

• Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
• Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
• Can be folded and compressed for easy installation through a variety of fuel cell openings

ID Spring Locator - 1.500" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.510" OD, .630" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.540" OD, .570" ID, .060" Thickness

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place.

ID Spring Locator - 1.540" OD, .640" ID, .060" Thickness

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place.

ID Spring Locator - 1.550" OD, .570" ID, .040" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 100 - 1.270" OD, .520" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

ID Spring Locator Set of 16 - 1.285" OD, .805" ID, .135" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .135" Thickness - Set of 16

ID Spring Locator Set of 16 - 1.300" OD, .805" ID, .205" Thickness

ID Spring Locator - 1.300" OD, .805" ID, .205" Thickness - Set of 16

ID Spring Locator Set of 16 - 1.540" OD, .640" ID, .060" Thickness

ID Spring Locator Set of 16 - 1.565" OD, .535" ID, .100" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 4 - 1.500" OD, .570" ID, .060" Thickness

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

Intake Valve for #60069 & 60079 Cylinder Heads

The Edelbrock #9754 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #60399 Cylinder Heads

The Edelbrock #9778 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #60809 & #60819 Cylinder Heads

The Edelbrock #93780 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60399 Cylinder Heads

The Edelbrock #9777 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #61409 & #77409 Cylinder Heads

The Edelbrock #9360 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel Valves with undercut stems for increased flow.

LIFTER GUIDE, CS 87-UP

Lifter Guide for Chevrolet V6, Small Block, Non-Vortec 305/350, Vortec, LT1

LIFTER GUIDE SET, CS 87-UP

Lifter Guide Set of 8 for Chevrolet V6, Small Block, Non-Vortec 305/350, Vortec, LT1

Line Clamp

• Fits 1/2 in. Tubing
• Lightweight Aluminum
• Red Anodized

LOADLIFTER 5000; LEAF SPRING LEVELING KIT

• Up To 5000 Lbs Of Load Leveling Capacity
• Eliminates Squat; Trailer Sway; Rough Ride; And Bottoming Out
• Fits 1986-1994 Toyota Motorhome Micro Mini

LoadLifter 5000 ULTIMATE replacement air spring

• Not A Full Kit
• One Air Spring
• Hardware Included

Low-Profile Barrel Band Clamp - 3"

• Stainless steel construction
• 3” (76mm) connection
• Easy to install and remove