Performance Parts

Water/Methanol Injection Inline Filter

• Filters up to 40 microns.
• Protects the system from foreign particles.
• Comes with 1/4" push lock fittings.

WirelessOne Gen II Key FOB

• WirelessONE Key Fob

10 Degree Superlock Steel Retainer Set of 100 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

5 Gal. Polished Tank w/ Viair 444c black compressor, 1/4" & 3/8" fittings and tank mounting hardware

• 5 Gallon Polished Aluminum Tank
• Viair 444c Black Compressor
• 1/4 In And 3/8 In Tank Fittings And Tank Mounting Hardware

7 Tool Steel Retainer for 8mm Valve w/ 26925 Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

All American Nickel 2-5/8" Exhaust Gas Tempature Gauge

• Completely electric
• Push button calibration
• Easy to read 2 5/8" size

All American Tradition 2-1/8" Fuel Level Gauge

• Pushbutton calibration
• Small 2 ⅛" hole size
• Installation hardware included

All American Tradition 3-3/8" Speedometer Gauge

• 3 3/8" Diameter
• Stainless High Step Bezel
• Curved Glass Lens

Autocross Gray 2-5/8" Fuel Level Gauge (0-90 Ohm)

• Easy to read 2 5/8" size
• Flat glass lens
• 0 ohms empty, 90 ohms full

Autocross Yellow 2-5/8" Cylinder Head Tempature Gauge

• Push button calibration
• Completely electric
• Easy to read 2 5/8" size

Autocross Yellow 2-5/8" Stock Eliminator Temp Gauge

• Pushbutton calibration
• Easy to read 2 5/8" size
• Installation hardware included

Auto-Flex Hose - Size 16 - 20 Ft. Length

• Textile Braid In Hose Liner

Brakes 6S, 6R & XTR Rear Caliper Rebuild Kit

• EDPM Rubber Pressure and Weather Seals
• Crush Washers & Dust Cap
• Services 1 Caliper

Brakes Premium Aluminum 4-Lug Wheel Spacers – 4x100, 4x108, 4x114.3 Bolt Patterns

• Widen Track
• 6061-T6 Aluminum
• Sold in Pairs

Brake Street S4 Disc Brake Pads for Select S4 Calipers

• Replacement Pads used in certain S4, 4-piston calipers
• Caliper hardware (8 pad abutments) sold separately.
• Sold in axle sets.

CAM BOLTS, 5/16 X 7/8 SHCS

COMP Cams' part number 6500CB-1, Cam Bolt for 6500 Belt Drive.

Conical Seal

• Easily Installed

CONICAL SPRING, 1.445/1.660 OD, 1.900 IH, .750 LIFT, 400 LBS/IN, SUPERFINISH, HR

Dual Taper 7.850" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.100" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

ELECTRONIC VOLTAGE REGULATOR-CHROME

ACCEL Motorcycle electronic voltage regulators do not require any re-wiring or special mounting.

GAUGE; BOOST CONTROLLER; 2 1/16in.; 30INHG-30PSI; INCL. SOLENOID; DIGITAL; PHANT

• EZ On-Controller Programming
• No Need For External Modules
• Peak Boost Recall

GAUGE; OIL PRESSURE; 2 1/16in.; 100PSI; DIGITAL STEPPER MOTOR; CHEVY RED BOWTIE;

• Modern LED Through The Dial
• Self Calibration Sequence During Power Up
• Detailed Instructions For Installation

GAUGE; SPEEDOMETER; 3 3/8in.; 160MPH; ELEC. PROGRAMMABLE; CHEVY RED BOWTIE; BLAC

• Red Pointer For Quick Glance Monitoring
• 1 Year Limited Warranty
• Modern LED Through The Dial Lighting

GAUGE; SPEEDOMETER; 5in.; 200MPH; MECHANICAL; PHANTOM

• Incl. Mounting Hardware/Instructions
• Traditional Rolling Drum Odometer
• Resettable Tripmeter