Performance Parts

Brakes Premium Aluminum 6-Lug Wheel Spacers – 6x5.50 Bolt Pattern

• Widen Track
• 6061-T6 Aluminum
• Sold in Pairs

Classic Series Front Brake Kit

• Aluminum, 2-Piston, Pad Guided Caliper
• Slot, Drill, Zinc Plated Rotor Finish
• Uses Common FMSI D0412 Brake Pad

Complete Transmission Installation Kit

• Designed for 50-ounce balance Small Block Ford engines using a T5 transmission
• Works with OE (original equipment) or MSD High Torque starters
• All hardware included

COOLING MANIFOLD - Big Block Chevrolet - As Cast

• Genuine Holley Quality Parts
• Replacement Manifold for the 20-242 BBC Kit

DRAG LINK TETHER BLACK

• Nylon webbsing with adjuster

Dual Channel Multifunction Remote

• Designed to control multiple LED accessories

Dual Pass/Single Row Universal Heat Exchanger (20"W/8"H/2"D) 20,500 BTU

Edelbrock heat exchanger part #15549 is a dual pass/single row design and delivers 20,500 btu/hr Includes a 3/4in. barbed inlet and outlet for plumbing, along with M6x1.0 threaded bungs for mounting and includes brackets.

EV Combined Charging Unit (CCU)

• Plug-and-play with AEM's EV controls
• Input over and under voltage protection
• Over temperature protection

Exhaust Back Pressure Plumbing Kit

• Premade -4AN Speed-Flex Hose - 24” Long
• Cushion Clamp & Mounting Hardware - to Mount Sensor
• Use w/ Sensor 554-102 (available separately)

Extreme+ Brake System Front

• Powder Coated Finish
• Staggered Pistons to Minimize Uneven Pad Wear
• Dual Seals, Dust/Weather & Pressure

Fuel Injectors, 60 Lb/Hr Short Body (Sold Individually)

3696 is sold individually, Short Body Siemens High Impedance (12.5 ohms) Fuel Injector with a flow rate of 60 lb/hr (630cc) @43.5psi.

GAUGE COVER; FOR 5in. PEDESTAL TACHOMETER; CARBON FIBER CUP

• Pedestal Mount

GAUGE; EXHAUST PRESS; 2 1/16in.; 100PSI; DIGITAL STEPPER MOTOR; ULTRA-LITE

• 12 And 16V Compatible
• Incl. Mounting Hardware/Instructions
• Recommended Particle Trap Kit PN[5375]

GAUGE MOUNT; 2 5/8in.; PEDESTAL W/CHROME CUP; FOR MECH. GAUGE

• Mounting Cup

GAUGE; NITROUS PRESS; 2 1/16in.; 1600PSI; STEPPER MOTOR W/PK/WRN; BLK/CHRM; SPEK

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

GAUGE; NITROUS PRESS; 2 1/16in.; 1600PSI; STEPPER MOTOR W/PK/WRN; WHT/BLK; SPEK

• 7 Color User Selectable
• Precision 280 Brushless Stepper Motor
• High And Low Warning Settings

GAUGE; NITROUS PRESSURE; 2 1/16in.; 1600PSI; DIGITAL STEPPER MOTOR; ULTRA-LITE I

• Modern LED Through-The-Dial Lighting
• 12 And 16V Compatible
• Incl. Wiring Harness

Hi-Tech Polylock Set for 1/2" Stud Ultra Pro Magnum Rockers

Hi-Tech Polylocks/Adjusting Nuts, 1/2" Stud for Ultra Pro Magnum/Ultra Pro Magnum XD Rockers - Set of 16

Hose Clamp

• Attach To Supporting Structure

HVAC FILTER; 18 X 30 X 1, MERV 11

• Merv 11 rating
• Easy to clean and reuse
• Lifetime limited warranty

In-Line Electric Fuel Pump for EFI rated at 80 GPH @ 45 PSI

Edelbrock part #1790 is a 80GPH In-Line Electric fuel pump featuring a black anodized aluminum housing and high-quality internals, resulting in both a strong and durable design.

Onyx Series Turbo Shield/Blanket GEN-3 T4 Shield

• Silicone coated Onyx Black outer shell.
• Silica inner insulation layer.
• Barrier layer of fine stainless mesh.

End Link Kit

Pair of Adjustable End Links

• Chromoly Rod Ends and Easy to Adjust Hex Bodies
• Sold as a pair
• Made in the U.S.A.

Performance Carb Base Gasket - Open Center,Bulk Packaged w/ UPC Label

• 1/16" Thick
• Precision Die Cut For Excellent Seal And Fit
• Can Be Trimmed If Necessary

Power Steering Hose End

• Stainless Steel (or Nickel Plated, or Black Chromate Finish – depending on the part number)