Performance Parts

Inner Bearing Cone-5;200 to 8;000-lb. Axles

• Comes With Nylon Bushings
• Industry Reference EQ-E1

Inner Bearing Race-5;200 to 8;000-lb. Axles

• Industry Number 25520
• Pairs With Bearing Cone PN[25580]
• 1-3/4 In. Shaft Diameter

Inspection Cover

• Black Oxide Steel
• Included with LK4000K
• Hardware included

Intake Manifold Spacer

• Cast Aluminum
• Dominator To Square Bore
• 2 1/4" Height

Intake Valve for #60669 & #60689 Cylinder Heads

The Edelbrock #93661 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60579, #61579 & #61599 Cylinder Heads

The Edelbrock #9780 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #60809 & #60819 Cylinder Heads

The Edelbrock #93781 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #77619, #77629, #77639 & #77649 Heads

The Edelbrock #9785 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #77919, #77929, #77939 & #77949 Heads

The Edelbrock #93775 Intakes Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Inverted Flare to AN Adapter Fitting

• Note the "L" Added to the Part Number for Long Threads - Just Before The "ERL"

Jet Assortment Kit w/Billet Plate 80-89

• Genuine Holley Quality Parts

LED External Warning Light, Blue

Blue LED Warning Light, silver finish

LINE; BRAIDED STAINLESS STEEL; #3 DIA.; 3FT. LENGTH;-3AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 3 ft. Hose Length
• Operating Temp -65 to 450 Deg. F

LINE; BRAIDED STAINLESS STEEL; #4 DIA.; 3FT. LENGTH;-4AN AND 1/8in. NPTF FITTING

• For Mechanical Pressure Gauge
• 3 ft. Hose Length
• Operating Temp -65 to 450 Deg. F

Line Clamp

• For Professional Engine Look

Line Clamp

• Widest Selection Available

Line Clamp

• Made In The USA
• One Size
• Silver

Line Clamp

• Blue Anodized
• Fits 3/8 in. Tubing
• Lightweight Aluminum

Livewire / Livewire TV USB High Speed Cable

• Can Be Used As A Replacement

LoadLifter 5000 ULTIMATE with internal jounce bumper

• Up To 5000lbs Of Load Leveling Capacity
• Air Adjustable from 5 to 100 psi
• Limited Lifetime Warranty

Lower Gear for 6100 Belt Drive

Lower Gear for 6100

Low Profile Vacuum Fitting for Holley Double-Pumper

Edelbrock part #8096 Vacuum Adapter Fitting is a low profile elbow that is designed to provide clearance for Holley and other carbs with a rear fuel bowl that extends over the vacuum port tap in most intake manifolds.

LS High-Mount A/C Accessory Drive Bracket - Fits Sanden SD508 or SD7 Comp.

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

LS/LT High-Mount Accessory Drive Bracket

• The most cost effective LS bracket solution on the market!
• Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
• A/C bracket accepts GM R4 compressor (Sanden version now available)

LS/LT High-Mount Accessory Drive Bracket

• The most cost effective LS bracket solution on the market!
• Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
• A/C bracket accepts GM R4 compressor (Sanden version now available)