Performance Parts

Set of 100 - 10 Degree, .310", Single Groove Locks w/o Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 100 - 10 Degree, 3/8", Single Groove Locks w/ Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 100 - 10 Degree, 3/8" Single Groove Locks w/ Lash Cap Recess -.050" Height

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 12 Hardened Lash Caps w/ 11/32" Valve Stem, .210" Head Height

Includes 12 Hardened Lash Caps: 11/32 Stem Size, .210" Head Height, .080" Thickness.

Set of 12 O-Ring Valve Seals for Stock Guide Size, 11/32" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

Set of 12 PTFE Valve Seals for .530" Guide Size, 3/8" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

Set of 12 PTFE Valve Seals for .530" Guide Size, 5/16" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

Set of 12 Steel Viton Valve Seals for .500" Guide Size, 8mm Valve Stem

COMP Cams valve stem Seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides.

Set of 12 Umbrella Valve Seals for Stock Guide Size, 11/32" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

Set of 16 - 10 Degree, .310", Single Groove Locks w/o Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 16 Hardened Lash Caps w/ 11/32" Valve Stem, .210" Head Height

Includes 16 Hardened Lash Caps: 11/32 Stem Size, .210" Head Height, .080" Thickness.

SG Series 2-1/8" Transmission Temperature Gauge

• Installation hardware included

SG Series 3" Ultimate Speedometer Gauge

• Stainless Low Step Bezel
• Curved Glass Lens
• Features a built-in ECM filter signal switch.

Silicone Vacuum Hose, Blue, 10mm x 100cm

• 100-percent silicone construction
• Measures 10mm x 100cm
• Available in multiple colors

Silver Gray 2-1/8" Air Pressure Gauge

• Pressure transducer included
• Pushbutton calibration
• Small 2 1/8" hole size

Silver Gray 2-5/8" Exhaust Gas Tempature Gauge

• Push button calibration
• Easy to read 2 5/8" size
• Completely electric

Silver Gray 2-5/8" Short Sweep Water Temperature Gauge

Quality, Service and Value are not new to us.

Silver Series 2-1/8" Fuel Level Gauge (1975-2010 Ohm)

• Silver Series
• Stainless Low Step Bezel
• Curved Glass Lens

Silver Series 3-3/8" Low Speed Speedometer Gauge

Silver Series 3 3/8" Low Speed Speedometer w/ Hourmeter with Stainless Low Step Bezel Flat Glass Lens

Silver Series 3-3/8" Speedometer Gauge

Silver Series 3 3/8" Speedometer 140 MPH with Stainless Low Step Bezel Flat Glass Lens

Single 16 ORB Inlet Conversion Kit for Holley VR2 Brushless Fuel Pump

• Single 1 5/16-12 (16 ORB) outlet

Single Needle Air Gauge; 200 PSI;

• Single Needle Air Gauge

Single Pass/Single Row Universal Heat Exchanger (16"W/16"H/1.5"D) 22,000 BTU

Edelbrock heat exchanger part #15407 is a single pass/single row design and delivers 22,000 btu/hr Includes a 3/4in. barbed inlet and outlet for plumbing, along with M6x1.0 threaded bungs for mounting.

Single Pass/Two Row Universal Heat Exchanger (26.5"W/5"H/2.62"D) 22,000 BTU

Edelbrock heat exchanger part #15406 is a single pass/two row design and delivers 22,000 btu/hr Includes a 3/4in. barbed inlet and outlet for plumbing, along with M6x1.0 threaded bungs for mounting.

Single Tailpipe Kit

• Recommended for Single Exhaust Systems
• Slip-fit Connectors for Easy Assembly
• Flowmaster Quality